Erisov, Yaroslav A.

2023

• 1 Erisov Y.A., Afrikantov V.V., Gorshkov Y.S. etc. Impact of Workpiece Position on Pallet during Laser Cutting on Heat-Affected Zone Formation // Physics of the Solid State 2023. — Vol. 65. Issue 1. № 1. — P. 12-16
• 2 Erisov Y.A., Aleksandrov S.E., Petrov I.N. etc. Strength of a Fiber-Reinforced Composite Material with an Anisotropic Matrix // Russian Metallurgy (Metally) 2023. — Vol. 2023. Issue 4. № 4. — P. 383-388
• 3 Erisov Y., Surudin S., Petrov I. etc. An advanced method to test the formability in single point incremental forming // AIP Conference Proceedings. — 2023. — Vol. 2700.

2022

• 1 Jiang C.-P., Chen P.-S., Erisov Y. etc. Microforming a Miniature Cup-Shaped Internal Gear Using a Cold Lateral Extrusion Process // Metals 2022. — Vol. 12. Issue 5.
• 2 Grechnikov F.V., Erisov Y.A., Surudin S.V. etc. Influence of the Cold Rolling Reduction Ratio and the Final Annealing Temperature on the Properties and Microstructure of Al–Mg–Sc Alloy Sheets // Russian journal of non-ferrous metals 2022. — Vol. 63. Issue 5. № 5. — P. 544-550
• 3 Aryshenskii V., Grechnikov F., Aryshenskii E. etc. Alloying Elements Effect on the Recrystallization Process in Magnesium-Rich Aluminum Alloy // Materials 2022. — Vol. 15. Issue 20. № 20.
• 4 Khaimovich A., Erisov Y., Shishkovsky I. Thermodynamic Conditions for Consolidation of Dissimilar Materials in Bimetal and Functional Graded Structures // Materials 2022. — Vol. 15. Issue 3.
• 5 Agapovichev A.V., Khaimovich A.I., Erisov Y.A. etc. Investigation of Soft Magnetic Material Fe-6.5Si Fracture Obtained by Additive Manufacturing // Materials 2022. — Vol. 15. Issue 24. № 24.
• 6 Erisov Y., Nikolaenko A., Petrov I. etc. Influence of the process parameters of incremental forming of personified implants of the cranial bones on their geometry // Journal of Physics: Conference Series. — 2022. — Vol. 2373(3).
• 7 Khaimovich A., Shishkovsky I., Erisov Y. etc. Research on Cracked Conditions in Nickel Chrome Alloy Ni50Cr33W4.5Mo2.8TiAlNb, Obtained by Direct Laser Deposition // Metals 2022. — Vol. 12. Issue 11. № 11.

2021

• 1 Lang L., Chernikov D., Erisov Y. etc. Computer Simulation of a High-Speed Forming of the Metal-Polymer Composite Material // 2021 International Scientific and Technical Engine Conference (EC). — 2021. — P. 1-7
• 2 Khaimovich A., Erisov Y., Smelov V. etc. Interface quality indices of Al–10Si–Mg aluminum alloy and Cr18–Ni10–Ti stainless-steel bimetal fabricated via selective laser melting // Metals 2021. — Vol. 11. Issue 1. — P. 1-16
• 3 Gorshkov Y.S., Erisov Y.A., Petrov I.N. etc. Effect of the Heat-Affected Zone Formed during Laser Cutting on the Bending of an Aluminum Alloy Workpiece // Russian Metallurgy (Metally) 2021. — Vol. 2021. Issue 10. — P. 1304-1308
• 4 Khaimovich A., Erisov Y., Agapovichev A. V. etc. Practical approbation of thermodynamic criteria for the consolidation of bimetallic and functionally gradient materials // Metals 2021. — Vol. 11. Issue 12.
• 5 Grechnikov F.V., Erisov Y.A., Surudin S.V. etc. Development of a Rheological Model of Hot Deformation as Exemplified by 1424 and В-1461 Aluminum Lithium Alloys // Russian journal of non-ferrous metals 2021. — Vol. 62. Issue 1. — P. 48-53
• 6 Erisov Y., Surudin S., Grechnikov F. etc. An exact axisymmetric solution in anisotropic plasticity // Symmetry 2021. — Vol. 13. Issue 5.

2020

• 1 Erisov Y., Grechnikov F., Surudin S. etc. A Simplified Yield Criterion of the Orthotropic Material Considering the Crystallographic Texture // IOP Conference Series: Materials Science and Engineering. — 2020. — Vol. 986. Issue 1.
• 2 Erisov Y., Surudin S., Alexandrov S. etc. Influence of the replacement of the actual plastic orthotropy with various approximations of normal anisotropy on residual stresses and strains in a thin disk subjected to external pressure // Symmetry 2020. — Vol. 12. Issue 11. — P. 1-16

2019

• 1 Kostyshev V. A. , Erisov Y.A. Technological Schemes and Conditions for the Production of Rolling Rings from Hollow As-Cast Blanks // Russian Metallurgy (Metally) 2019. — Vol. 2019. Issue 7. — P. 737-742
• 2 Chernikov D., Erisov Y., Petrov I. etc. Research of Different Processes for Forming Fiber Metal Laminates // International Journal of Automotive Technology 2019. — Vol. 20. — P. 89-93
• 3 Glushchenkov V., Chernikov D., Erisov Y. etc. Electro-magnetic forming of fiber metal laminates // Key Engineering Materials. — 2019. — Vol. 794 KEM. — P. 107-112
• 4 Grechnikov F.V., Erisov Y.A., Petrov I.N. Influence of the Crystallographic Texture of Aluminum Sheets on the Fracture Toughness of Metal–Polymer Composite Materials // Russian Metallurgy (Metally) 2019. — Vol. 2019. Issue 4. — P. 341-345
• 5 Grechnikov F.V., Erisov Y.A., Alexandrov S.E. Effect of the Anisotropic Yield Condition on the Predicted Distribution of Residual Stresses in a Thin Disk // Doklady Physics 2019. — Vol. 64. Issue 5. — P. 233-237
• 6 Khaimovich A., Erisov Y., Surudin S. etc. The method for determining the friction coefficient in relation to the hot forging processes // Key Engineering Materials 2019. — Vol. 822. — P. 137-143
• 7 Erisov Y., Surudin S., Bobrovskij I. etc. The end-to-end simulation of semi-continuous casting and subsequent hot rolling with account of microstructure // Key Engineering Materials 2019. — Vol. 822. — P. 11-15
• 8 Erisov Y., Grechnikov F., Kuzin A. etc. Texture evolution during hot deformation of al-cu-li-mg-zn-zr-sc alloy // Materials Science Forum. — 2019. — Vol. 946 MSF. — P. 856-861

2018

• 1 Grechnikov F.V., Erisov Y.A., Surudin S.V. etc. Investigation into the Formation of Texture, Microstructure, and Anisotropy of Properties during Rolling Sheets of the Aluminum–Lithium 1420 Alloy // Russian journal of non-ferrous metals 2018. — Vol. 59. Issue 1. — P. 56-61
• 2 Erisov Y., Surudin S., Grechnikov F. Hot deformation behavior of Al-Cu-Li-Mg-Zn-Zr-Sc alloy in as-cast and hot-rolled condition // Materials Science Forum. — 2018. — Vol. 920 MSF. — P. 244-249
• 3 Grechnikov F.V., Surudin S.V., Erisov Y.A. etc. Influence of Material Structure Crystallography on its Formability in Sheet Metal Forming Processes // IOP Conference Series: Materials Science and Engineering. — 2018. — Vol. 286. Issue 1.
• 4 Grechnikov F.V., Erisov Y.A. Scientific Foundations for Creation of Sheet Materials with Specified Crystallography of Structure for Aerospace Applications // Metal science and heat treatment 2018. — Vol. 60. Issue 1-2. — P. 13-17
• 5 Erisov Y., Surudin S. Structure and anisotropy of the mechanical properties of hot- and cold-rolled semi-finished products from aluminium-lithium alloys // Materials Science Forum. — 2018. — Vol. 945 MSF. — P. 611-616
• 6 Ermakov B., Vologzhanina S., Bobrovskij I. etc. Resistance to brittle fracture and availability of austenitic steels // IOP Conference Series: Materials Science and Engineering. — 2018. — Vol. 450. Issue 3.
• 7 Grechnikov F.V., Erisov Y.A., Surudin S.V. etc. Theoretical and experimental study of plastic anisotropy of Al-1Mn alloy taking into account the crystallographic orientation of the structure // Materials Physics and Mechanics 2018. — Vol. 40. Issue 2. — P. 274-284
• 8 Erisov Y.A., Grechnikov F.V. Physical Modelling of Hot Rolling for Low-Density Alloy of the Al–Mg–Li–Zr–Zn–Sc System // Metallurgist 2018. — Vol. 61. Issue 9-10. — P. 822-829

2017

• 1 Kolobov V.G., Aryshenskii E.V., Erisov Y.A. etc. Evaluation of bevarage can end forming process using Kolmogorov's fracture criterion // Key Engineering Materials. — 2017. — Vol. 746 KEM. — P. 3-9
• 2 Kostyshev V. A. , Erisov Y.A. Production of rings for gas-turbine engines by the hot rolling of welded blanks // Russian Engineering Research 2017. — Vol. 37. Issue 6. — P. 490-493
• 3 Grechnikov F.V. , Erisov Ya.A. , Tikhonova A.A. etc. Влияние анизотропии заготовок на разнотолщинность стенки изделия при вытяжке // Известия Самарского научного центра РАН 2017. — Vol. 19. № 1(3). — P. 581-586
• 4 Nosova E., Erisov Y., Grechnikov F. Multi-cycle rolled aluminum alloy 3103 sandwiches: Mechanical properties and stamp ability // MATEC Web of Conferences. — 2017. — Vol. 129.
• 5 Huang T.-H., Jiang C.-P., Grechnikov F. etc. Effect of annealing treatment on die filling rate of mini gear in squeezing forming process // Key Engineering Materials. — 2017. — Vol. 746 KEM. — P. 108-113
• 6 Mikheev V.A., Surudin S.V., Erisov Ya.A. etc. Features of the process of stretch forming shells convex-concave shape // Key Engineering Materials. — 2017. — Vol. 746 KEM. — P. 63-68
• 7 Andrianov A.V., Erisov Y.A., Aryshensky E.V. etc. Application of shell elements in simulation of cans ironing // Journal of Physics: Conference Series. — 2017. — Vol. 803. Issue 1.
• 8 Surudin S., Erisov Y., Chernikov D. Influence of the sheet metal anisotropy on polythickness of the skin after stretch forming // Key Engineering Materials. — 2017. — Vol. 743 KEM. — P. 207-211
• 9 Nam A., Kawalla R., Zinoviev A. etc. Temperature validation of 3D model for the reversing hot rolling in connection with a coil model // Key Engineering Materials. — 2017. — Vol. 746 KEM. — P. 132-137
• 10 Andrianov S.V., Voronin S.V. , Aryshensky V.Yu. etc. Влияние морфологии интерметаллидных фаз на разрушение заготовки при глубокой вытяжке с принудительным утонением // Известия Самарского научного центра РАН 2017. — Vol. 19. № 1(3). — P. 574-580
• 11 Grechnikov F.V., Bobrovskiy I.N., Erisov Ya.A. etc. Инициатива «геном материала» в мире и Российской Федерации // Известия Самарского научного центра РАН 2017. — Vol. 19. № 1 (3). — P. 563-573

2016

• 1 Erisov Y.A., Grechnikov F.V., Surudin S.V. Yield function of the orthotropic material considering the crystallographic texture // Structural Engineering and Mechanics 2016. — Vol. 58. Issue 4. — P. 677-687
• 2 Suleymanova I., Shlyapugin A., Erisov Y. Computer simulation of the half-tore forming process from a ring blank // Key Engineering Materials. — 2016. — Vol. 684. — P. 227-233
• 3 Grechnikov F.V., Erisov Y.A. Virtual material model with the given crystallographic orientation of the structure // Key Engineering Materials. — 2016. — Vol. 684. — P. 134-142
• 4 Erisov Y., Grechnikov F. Influence of crystallographic texture on plastic instability in sheet metal forming // Proceedings of 2015 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2015. — 2016. —
• 5 Grechnikov F.V., Erisov Ya.A., Alexandrov S.E. Effect of anisotropic yield criterion on the springback in plane strain pure bending // CEUR Workshop Proceedings. — 2016. — Vol. 1638. — P. 569-577
• 6 Alexandrov S., Dinh Kien N., Erisov Y. etc. Evolution of internal variables in an expanding hollow cylinder at large plastic strains // SpringerPlus 2016. — Vol. 5. Issue 1.
• 7 Erisov, Y. A., Surudin, S. V., Tiabashvili, A. T. etc. Computer simulation of crystallographic orientations influence on earing during drawing // OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE 2016. — Issue 3. — P. 6-14
• 8 Grechnikov F.V., Erisov Ya.A. Calculation basis of the specified structure crystallography of materials with FCC lattice and its implementation at aluminum strips rolling // XX Mendeleev Congress on general and applied chemistry. — 2016. — P. 32-32
• 9 Erisov Y., Grechnikov F. The research of influence of cold rolling conditions on mechanical properties anisotropy of sheets from aluminum alloy 8011A // Key Engineering Materials. — 2016. — Vol. 685. — P. 385-388
• 10 Alexandrov S., Erisov Y., Grechnikov F. Effect of the yield criterion of matrix on the brittle fracture of fibres in uniaxial tension of composites // Advances in Materials Science and Engineering 2016. — Vol. 2016.
• 11 Erisov Y.A., Grechnikov F.V., Oglodkov M.S. The influence of fabrication modes of sheets of V-1461 alloy on the structure crystallography and anisotropy of properties // Russian journal of non-ferrous metals 2016. — Vol. 57. Issue 1. — P. 19-24
• 12 Erisov Ya.A., Grechnikov F.V., Surudin S.V. Критерий пластичности анизотропной среды с учетом кристаллографии структуры и его экспериментальная проверка // Vestnik of Nosov Magnitogorsk State Technical University 2016. — Vol. 14. № 4. — P. 42-49
• 13 Erisov Y.A. Mathematical model of anisotropic elastoplastic material // Key Engineering Materials. — 2016. — Vol. 684. — P. 127-133
• 14 Erisov Y., Surudin S., Shlyapugin A. etc. The end-to-end computer simulation of casting and subsequent metal forming // Key Engineering Materials. — 2016. — Vol. 685. — P. 167-171
• 15 Grechnikov F., Gorshkov Y., Erisov Y. Bending process simulation of a flat workpiece with various cross-sectional mechanical properties with PAM-STAMP 2G // Key Engineering Materials. — 2016. — Vol. 685. — P. 133-136
• 16 Morozov M.S., Osinskaya J., Pokoev A.V. etc. Рентгенофазовый анализ алюминиевого сплава AL-LI, состаренного в постоянном магнитном поле // Scientific discussion 2016. — Vol. 1. № 2. — P. 80-84

2015

• 1 Grechnikov F.V., Erisov Y.A. The Theoretical Principles of Sheet Metal Forming Processes Intensification Based on Anisotropy // Applied Mechanics and Materials 2015. — № V. 770. — P. 258-263
• 2 Erisov Y.A., Surudin S.V. Orthotropic yield criteria based on crystallographic orientations and their effect on the development of plastic zones in thin discs // The 2015 World Congress on Advances in Structural Engineering and Mechanics (ASEM15) & Advances in Aeronautics, Nano, Bio, Robotics, and Energy (ANBRE15). — 2015. — P. 54-54
• 3 Erisov Y.A., Grechnikov F.V., Pribytkov D.A. Investigation into the influence of cold rolling and thermal treatment modes on the mechanical properties and structure of sheets of BrKh1Tsr chromium-zirconium bronze // Russian journal of non-ferrous metals 2015. — Vol. 56. Issue 2. — P. 190-195
• 4 Grechnikov F.V., Antipov V.V., Erisov Y.A. etc. A manufacturability improvement of glass-fiber reinforced aluminum laminate by forming an effective crystallographic texture in V95 alloy sheets // Russian journal of non-ferrous metals 2015. — Vol. 56. Issue 1. — P. 39-43