федеральное государственное автономное образовательное учреждение высшего образования
«Самарский национальный исследовательский университет имени академика С.П. Королева»

Balyakin, Andrey V.

  • Department of Engine Production Technology, senior Lecturer
  • engineer
  • Department of Engineering Graphics , senior Lecturer
2021
  • 1 Balyakin A., Goncharov E. Investigation of the process of waterjet processing of samples obtained by SLM // Materials Today: Proceedings. — 2021. — Vol. 38. — P. 1607-1612
2020
  • 1 Balyakin A.V., Vdovin R.A., Kyarimov R.R. Investigation of full arrangement of models on the mechanical properties of samples made from photopolymer material FullCure 720 // IOP Conference Series: Materials Science and Engineering. — 2020. — Vol. 862. Issue 2.
  • 2 Balyakin A.V., Goncharov E.S. Hydroabrasive machining of internal channels of parts obtained by SLM // IOP Conference Series: Materials Science and Engineering. — 2020. — Vol. 862. Issue 3.
  • 3 Balyakin A.V., Vdovin R.A., Ispravnikova S.S. Application of additive technologies for manufacturing turbine stator parts in aircraft engines // Journal of Physics: Conference Series. — 2020. — Vol. 1515. Issue 4.
  • 4 Balyakin A.V., Chempinsky L.A. Experience of teaching geometric modeling at schools and universities // Journal of Physics: Conference Series. — 2020. — Vol. 1691. Issue 1.
  • 5 Balyakin A.V., Vdovin R.A., Kyarimov R.R. Study of FDM technology applications in the casting production of GTE details // IOP Conference Series: Materials Science and Engineering. — 2020. — Vol. 971. Issue 2.
2019
  • 1 Balyakin A., Goncharov E., Zhuchenko E. I. The effect of preprocessing on surface quality in the chemical polishing of parts from titanium alloy produced by SLM // Materials Today: Proceedings. — 2019. — Vol. 19. — P. 2291-2294
  • 2 Nosova E., Baliakin A., Galkina N. etc. Research of Titanium Covering Effect Received by Selective Laser Melting on Mechanical Properties of Aluminum Alloy Al-6Mg // Materials Today: Proceedings. — 2019. — Vol. 11. — P. 370-374
  • 3 Balyakin A., Zhuchenko E. I. , Nosova E. Study of heat treatment impact on the surface defects appearance on samples obtained by selective laser melting of Ti-6Al-4V during chemical polishing // Materials Today: Proceedings. — 2019. — Vol. 19. — P. 2307-2311
2018
  • 1 Balaykin A.V., Bezsonov K. A. , Nekhoroshev M. V. etc. Developing Parametric Models for the Assembly of Machine Fixtures for Virtual Multiaxial CNC Machining Centers // IOP Conference Series: Materials Science and Engineering. — 2018. — Vol. 302. Issue 1.
  • 2 Balyakin A.V., Shvetcov A.N., Zhuchenko E. I. Chemical polishing of samples obtained by selective laser melting from titanium alloy Ti6Al4V // MATEC Web of Conferences. — 2018. — Vol. 224.
  • 3 Balyakin A.V., Bezsonova E. M. , Vdovin R.A. etc. Rapid Prototyping Technology for Manufacturing GTE Turbine Blades // IOP Conference Series: Materials Science and Engineering. — 2018. — Vol. 327. Issue 2.
  • 4 Balaykin A.V., Vdovin R.A., Bezsonova E. M. Analysis of possibilities of high-speed prototyping technology in hot section manufacturing // MATEC Web of Conferences. — 2018. — Vol. 224.
  • 5 Galkina N.V., Nosova Y.A., Balyakin A.V. Studying hardness, workability and minimum bending radius in selectively laser-sintered Ti-6Al-4V alloy samples // IOP Conference Series: Materials Science and Engineering. — 2018. — Vol. 327. Issue 4.
2017
  • 1 Balaykin A.V., Nosova E.A., Galkina N.V. Study of the Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy grain structure uniformity after bending and annealing // IOP Conference Series: Materials Science and Engineering. — 2017. — Vol. 177. Issue 1.
  • 2 Balaykin A.V., Nosova E.A., Galkina N.V. Остаточные напряжения заготовок из сплава ВТ-22 после деформации и отжига // Известия Самарского научного центра РАН 2017. — Vol. 19. № 1. Pt. 1. — P. 25-30
  • 3 Balaykin A.V., Nosova E.A., Galkina N.V. The study of the ageing impact on workability and hardness of the samples made of alloy VV751P (Ni-15Co-10Cr) after selective laser sintering // Key Engineering Materials. — 2017. — Vol. 746 KEM. — P. 192-197
  • 4 Samsonov V.N. , Balyakin A.V. , Barmanov I.S. Технология изготовления высокоэффективных струйных элементов // Известия Самарского научного центра РАН 2017. — Vol. 19. № 4. — P. 41-47
  • 5 Alexeev V.P., Balyakin A.V., Khaimovich A.I. Influence of the direction of selective laser sintering on machinability of parts from 316L steel // IOP Conference Series: Materials Science and Engineering. — 2017. — Vol. 177. Issue 1.
  • 6 Galkina N.V., Nosova E.A., Balaykin A.V. Study of the impact of treatment modes on hardness, deformability and microstructure of VT6 (Ti-6Al-4V) and VV751P (Ni-15Co-10Cr) alloy samples after selective laser sintering // MATEC Web of Conferences. — 2017. — Vol. 129.
2016
  • 1 Balaykin A.V., Kondratev A.I., Galkina N.V. Determination of rheological properties of titanium alloys under conditions of high strain rates // Key Engineering Materials. — 2016. — Vol. 684. — P. 222-226
  • 2 Khaimovich A.I., Balaykin A.V., Galkina N.V. Phenomenological modeling of rheological properties of polyetheretherketones reinforced with high modulus carbon in the machining process by a reversible analysis method // Key Engineering Materials. — 2016. — Vol. 685. — P. 119-123
  • 3 Balaykin A.V., Nosova E.A., Galkina N.V. EFFECT OF AGING ON DEFORMABILITY AND HARDNESS OF NI-15CO-10CR SUPER ALLOY SAMPLES OBTAINED BY SELECTIVE LASER SINTERING // THE INTERNATIONAL SEMINAR ON INTERDISCIPLINARY PROBLEMS IN ADDITIVE TECHNOLOGIES . — 2016. — Vol. 1. — P. 5
  • 4 Balaykin A.V., Nosova E.A., Galkina N.V. Research of Residual Stress after Deformation and Annealing of a Titanium Alloy Ti-5Al-5Mo-5V-1Cr-1Fe Billets // IOP Conference Series: Materials Science and Engineering. — 2016. — Vol. 142. Issue 1.
  • 5 Balyakin A., Dobryshkina E.M., Vdovin R. etc. Исследование применения технологий быстрого прототипирования для изготовления лопаток турбины ГТД // Известия Самарского научного центра РАН 2016. — Vol. 18. № 4-6. — P. 1168-1172
  • 6 Balaykin A.V., Nosova E.A., Galkina N.V. Research of annealing mode for high accuracy stamped parts production from titanium alloy 83Ti-5Al-5Cr-5Mo after tooling // IOP Conference Series: Materials Science and Engineering. — 2016. — Vol. 156. Issue 1.
2015
  • 1 Alexander I. Khaimovich, Andrey V. Balaykin, Natalia V. Galkina Study of Rheological Properties of Materials at the Blade Processing on Example of Milling Nickel-Chromium Alloy 10H11N23T3 MR VD // Applied Mechanics and Materials 2015. — № V. 756. — P. 120-125
  • 2 A.I. Khaimovich, A.V. Balaykin, Galkina N.V. Study of the Rheological Properties of Materials at the Blade Processing on Example of Milling Nickel-Chromium Alloy 10H11N23T3 MR VD // Applied Mechanics and Materials 2015. — № V. 756. — P. 120-126
  • 3 Agapovichev A.V., Balaykin A.V., Smelov V.G. etc. Application of additive technologies in the production of aircraft engine parts // Modern Applied Science 2015. — Vol. 9. Issue 4. — P. 151-159
  • 4 Agapovichev A.V., Balaykin A.V., Smelov V.G. Production technology of the internal combustion engine crankcase using additive technologies // Modern Applied Science 2015. — Vol. 9. Issue 4. — P. 335-343
2014
  • 1 Khaimovich A.I., Balaykin A.V., Kondratiev A.I. Methodology of rheological material properties phenoinenological modeling at high speed cutting by reverse analysis // Research Journal of Applied Sciences 2014. — Vol. 9. Issue 11. — P. 753-760
  • 2 Khaimovich A.I., Balaykin A.V. Analysis of plastic properties of titanium alloys under severe deformation conditions in machining // International Journal of Engineering and Technology 2014. — Vol. 6. Issue 5. — P. 2184-2190
  • 3 Khaimovich A.I., Balaykin A.V. Analysis of titanium alloys plastic properties under severe deformation conditions in machining // ARPN Journal of Engineering and Applied Sciences 2014. — Vol. 9. Issue 10. — P. 1828-1833