Balyakin, Andrey V.

2025

• 1 Khaimovich A., Balyakin A., Nosova E. etc. Effect of Interface Relief on the Occurrence of Cracks at the Contact Point of Laser-Direct-Energy-Deposited Copper Alloy and Nickel Base Superalloy // Crystals 2025. — Vol. 15. Issue 2. № 2.
• 2 Khaimovich A., Oleynik M., Balyakin A. etc. Study of variability phenomena during direct metal deposition of nickel based superalloy on residual porosity and microhardness // EPJ Web of Conferences. — 2025. — Vol. 318.
• 3 Paringer R., Khaimovich A., Pechenin V. etc. In-Situ Monitoring of Directed Energy Deposition Laser Beam of Nickel-Based Superalloy via Built-in Optical Coaxial Camera // Sensors (Switzerland) 2025. — Vol. 25. Issue 23. № 23.

2024

• 1 Khaimovich A.I., Zlobin E.P., Goncharov E.S. etc. Influence of Technological Parameters of Processing of the Tumbling Machine on Quality of a Surface Layer // AIP Conference Proceedings. — 2024. — Vol. 2969. Issue 1. № 1.
• 2 Oleynik M.A., Balyakin A.V. Investigation of the Modes of Heat Treatment of Parts Made of Heat-Resistant Alloys for the Degree of Removal of Residual Stresses // AIP Conference Proceedings. — 2024. — Vol. 2969. Issue 1. № 1.
• 3 Balyakin A.V., Vdovin R.A., Goncharov E.S. etc. Investigation of the Application of 3D Printing Technology in the Foundry of Large-Sized Parts // AIP Conference Proceedings. — 2024. — Vol. 2969. Issue 1. № 1.
• 4 Khaimovich A., Nosova E., Baliakin A. etc. Study of Variability Phenomena in Direct Energy Deposition of Nickel-Based Superalloy on Geometric Accuracy and Residual Stress Formation // Materials Science Forum 2024. — Vol. 1139. — P. 21-30
• 5 Balyakin A.V., Nosova E.A., Oleinik M.A. Heat Treatment Effect on the Structure and Properties of Workpieces from Heat-Resistant Nickel Alloys Obtained by Additive Technologies // Russian journal of non-ferrous metals 2024. — Vol. 65. Issue 1. № 1. — P. 34-41

2023

• 1 Vdovin R.A., Balyakin A.V., Goncharov E.S. etc. Способ сборки выжигаемых моделей, полученных FDM печатью // Международная научно-техническая конференция имени Н.Д. Кузнецова «Перспективы развития двигателестроения». — 2023. — Vol. 1. — P. 291-292
• 2 Oleynik M.A., Balyakin A.V., Zlobin E.P. etc. Influence of direct metal deposition modes on the shaping of single tracks and walls made of heat-resistant powder material // Journal of Physics: Conference Series. — 2023. — Vol. 2573. Issue 1. № 1.
• 3 Oleynik M., Balyakin A., Khaimovich A. etc. Development of a calibration technique of a finite element model for calculating compensation of deformations from the action of residual stresses in additive manufacturing // E3S Web of Conferences. — 2023. — Vol. 458.
• 4 Zlobin E.P., Khaimovich A.I., Balaykin A.V. A vibration treatment of holes obtained by selective laser melting // E3S Web of Conferences. — 2023. — Vol. 458.
• 5 Nosova E.A., Balyakin A.V., Oleynik M.A. Effect of Annealing on the Microstructure and Hardness of EP648 Alloy after Direct Metal Deposition // Physics of the Solid State 2023. — Vol. 65. Issue 1. № 1. — P. 32-35

2022

• 1 Balyakin A.V., Zlobin E.P., Oleynik M.A. etc. Investigation of the Influence of Direct Metal Deposition Modes on Microstructure and Formation of Defects in Samples of Heat Resistant Alloy // Materials Research Proceedings. — 2022. — Vol. 21. — P. 23-27
• 2 Oleynik M., Khaimovich A., Balyakin A. Development of an Experimental Robotic Complex for Direct Metal Deposition and Testing of Deposition Modes for HeatResistant Powder Material // Materials Research Proceedings. — 2022. — Vol. 21. — P. 349-357
• 3 Khaimovich A., Balyakin A., Oleynik M. etc. Optimization of Process Parameters for Powder Bed Fusion Additive Manufacturing Using a Linear Programming Method: A Conceptual Framework // Metals 2022. — Vol. 12. Issue 11. № 11.

2021

• 1 Khaimovich A.I., Balyakin A.V., Shchedrin E.Y. etc. Influence of the fusion modes on the microstructure and formation of defects in samples made of a heat-resistant nickel-based alloy made by direct laser fusion // AIP Conference Proceedings. — 2021. — Vol. 2402.
• 2 Balyakin A., Goncharov E. Investigation of the process of waterjet processing of samples obtained by SLM // Materials Today: Proceedings. — 2021. — Vol. 38. — P. 1607-1612
• 3 Oleynik M., Khaimovich A., Balyakin A. Determining the optimal mode of the inconel 718 alloy deposition at a direct laser deposition plant // Materials Science Forum. — 2021. — Vol. 1037 MSF. — P. 3-12

2020

• 1 Balyakin A.V., Vdovin R.A., Ispravnikova S.S. Application of additive technologies for manufacturing turbine stator parts in aircraft engines // Journal of Physics: Conference Series. — 2020. — Vol. 1515. Issue 4.
• 2 Balyakin A.V., Goncharov E.S. Hydroabrasive machining of internal channels of parts obtained by SLM // IOP Conference Series: Materials Science and Engineering. — 2020. — Vol. 862. Issue 3.
• 3 Balyakin A.V., Chempinsky L.A. Experience of teaching geometric modeling at schools and universities // Journal of Physics: Conference Series. — 2020. — Vol. 1691. Issue 1.
• 4 Balyakin A.V., Vdovin R.A., Kyarimov R.R. Investigation of full arrangement of models on the mechanical properties of samples made from photopolymer material FullCure 720 // IOP Conference Series: Materials Science and Engineering. — 2020. — Vol. 862. Issue 2.
• 5 Balyakin A.V., Vdovin R.A., Kyarimov R.R. Study of FDM technology applications in the casting production of GTE details // IOP Conference Series: Materials Science and Engineering. — 2020. — Vol. 971. Issue 2.

2019

• 1 Nosova E., Baliakin A., Galkina N. etc. Research of Titanium Covering Effect Received by Selective Laser Melting on Mechanical Properties of Aluminum Alloy Al-6Mg // Materials Today: Proceedings. — 2019. — Vol. 11. — P. 370-374
• 2 Balyakin A., Goncharov E., Zhuchenko E. The effect of preprocessing on surface quality in the chemical polishing of parts from titanium alloy produced by SLM // Materials Today: Proceedings. — 2019. — Vol. 19. — P. 2291-2294
• 3 Balyakin A., Zhuchenko E., Nosova E. Study of heat treatment impact on the surface defects appearance on samples obtained by selective laser melting of Ti-6Al-4V during chemical polishing // Materials Today: Proceedings. — 2019. — Vol. 19. — P. 2307-2311

2018

• 1 Balaykin A.V., Bezsonov K.A., Nekhoroshev M.V. etc. Developing Parametric Models for the Assembly of Machine Fixtures for Virtual Multiaxial CNC Machining Centers // IOP Conference Series: Materials Science and Engineering. — 2018. — Vol. 302. Issue 1.
• 2 Balaykin A.V., Vdovin R.A., Dobryshkina E.M. Analysis of possibilities of high-speed prototyping technology in hot section manufacturing // MATEC Web of Conferences. — 2018. — Vol. 224.
• 3 Balyakin A.V., Shvetcov A.N., Zhuchenko E.I. Chemical polishing of samples obtained by selective laser melting from titanium alloy Ti6Al4V // MATEC Web of Conferences. — 2018. — Vol. 224.
• 4 Balyakin A.V., Dobryshkina E.M., Vdovin R.A. etc. Rapid Prototyping Technology for Manufacturing GTE Turbine Blades // IOP Conference Series: Materials Science and Engineering. — 2018. — Vol. 327. Issue 2.
• 5 Galkina N.V., Nosova Y.A., Balyakin A.V. Studying hardness, workability and minimum bending radius in selectively laser-sintered Ti-6Al-4V alloy samples // IOP Conference Series: Materials Science and Engineering. — 2018. — Vol. 327. Issue 4.

2017

• 1 Balaykin A.V., Nosova E.A., Galkina N.V. Остаточные напряжения заготовок из сплава ВТ-22 после деформации и отжига // Известия Самарского научного центра РАН 2017. — Vol. 19. № 1. Pt. 1. — P. 25-30
• 2 Balaykin A.V., Nosova E.A., Galkina N.V. The study of the ageing impact on workability and hardness of the samples made of alloy VV751P (Ni-15Co-10Cr) after selective laser sintering // Key Engineering Materials. — 2017. — Vol. 746 KEM. — P. 192-197
• 3 Samsonov V.N. , Balyakin A.V. , Barmanov I.S. Технология изготовления высокоэффективных струйных элементов // Известия Самарского научного центра РАН 2017. — Vol. 19. № 4. — P. 41-47
• 4 Alexeev V.P., Balyakin A.V., Khaimovich A.I. Influence of the direction of selective laser sintering on machinability of parts from 316L steel // IOP Conference Series: Materials Science and Engineering. — 2017. — Vol. 177. Issue 1.
• 5 Galkina N.V., Nosova E.A., Balaykin A.V. Study of the impact of treatment modes on hardness, deformability and microstructure of VT6 (Ti-6Al-4V) and VV751P (Ni-15Co-10Cr) alloy samples after selective laser sintering // MATEC Web of Conferences. — 2017. — Vol. 129.
• 6 Balaykin A.V., Nosova E.A., Galkina N.V. Study of the Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy grain structure uniformity after bending and annealing // IOP Conference Series: Materials Science and Engineering. — 2017. — Vol. 177. Issue 1.

2016

• 1 Balaykin A.V., Nosova E.A., Galkina N.V. EFFECT OF AGING ON DEFORMABILITY AND HARDNESS OF NI-15CO-10CR SUPER ALLOY SAMPLES OBTAINED BY SELECTIVE LASER SINTERING // THE INTERNATIONAL SEMINAR ON INTERDISCIPLINARY PROBLEMS IN ADDITIVE TECHNOLOGIES . — 2016. — Vol. 1. — P. 5
• 2 Balyakin A., Dobryshkina E.M., Vdovin R. etc. Исследование применения технологий быстрого прототипирования для изготовления лопаток турбины ГТД // Известия Самарского научного центра РАН 2016. — Vol. 18. № 4-6. — P. 1168-1172
• 3 Balaykin A.V., Kondratev A.I., Galkina N.V. Determination of rheological properties of titanium alloys under conditions of high strain rates // Key Engineering Materials. — 2016. — Vol. 684. — P. 222-226
• 4 Khaimovich A.I., Balaykin A.V., Galkina N.V. Phenomenological modeling of rheological properties of polyetheretherketones reinforced with high modulus carbon in the machining process by a reversible analysis method // Key Engineering Materials. — 2016. — Vol. 685. — P. 119-123
• 5 Balaykin A.V., Nosova E.A., Galkina N.V. Research of Residual Stress after Deformation and Annealing of a Titanium Alloy Ti-5Al-5Mo-5V-1Cr-1Fe Billets // IOP Conference Series: Materials Science and Engineering. — 2016. — Vol. 142. Issue 1.
• 6 Balaykin A.V., Nosova E.A., Galkina N.V. Research of annealing mode for high accuracy stamped parts production from titanium alloy 83Ti-5Al-5Cr-5Mo after tooling // IOP Conference Series: Materials Science and Engineering. — 2016. — Vol. 156. Issue 1.

2015

• 1 A.I. Khaimovich, A.V. Balaykin, Galkina N.V. Study of the Rheological Properties of Materials at the Blade Processing on Example of Milling Nickel-Chromium Alloy 10H11N23T3 MR VD // Applied Mechanics and Materials 2015. — № V. 756. — P. 120-126
• 2 Alexander I. Khaimovich, Andrey V. Balaykin, Natalia V. Galkina Study of Rheological Properties of Materials at the Blade Processing on Example of Milling Nickel-Chromium Alloy 10H11N23T3 MR VD // Applied Mechanics and Materials 2015. — № V. 756. — P. 120-125
• 3 Agapovichev A.V., Balaykin A.V., Smelov V.G. etc. Application of additive technologies in the production of aircraft engine parts // Modern Applied Science 2015. — Vol. 9. Issue 4. — P. 151-159
• 4 Agapovichev A.V., Balaykin A.V., Smelov V.G. Production technology of the internal combustion engine crankcase using additive technologies // Modern Applied Science 2015. — Vol. 9. Issue 4. — P. 335-343

2014

• 1 Khaimovich A.I., Balaykin A.V. Analysis of plastic properties of titanium alloys under severe deformation conditions in machining // International Journal of Engineering and Technology 2014. — Vol. 6. Issue 5. — P. 2184-2190
• 2 Khaimovich A.I., Balaykin A.V., Kondratiev A.I. Methodology of rheological material properties phenoinenological modeling at high speed cutting by reverse analysis // Research Journal of Applied Sciences 2014. — Vol. 9. Issue 11. — P. 753-760
• 3 Khaimovich A.I., Balaykin A.V. Analysis of titanium alloys plastic properties under severe deformation conditions in machining // ARPN Journal of Engineering and Applied sciences 2014. — Vol. 9. Issue 10. — P. 1828-1833