Konovalov, Sergey V.

2024

• 1 Makhan Kh., Konovalov S.V., Najm S.M. etc. Experimental and Numerical Investigations of the Fatigue Life of AA2024 Aluminium Alloy-Based Nanocomposite Reinforced by TiO2 Nanoparticles Under the Effect of Heat Treatment // International Journal of Precision Engineering and Manufacturing 2024. — Vol. 25. Issue 1. № 1. — P. 141-153
• 2 Su C., Konovalov S., Chen X. etc. Microstructure and mechanical property of the novel Al17Cr17Co33Ni33 eutectic medium entropy alloy fabricated by powder plasma arc additive manufacturing // MATERIALS LETTERS 2024. — Vol. 361.
• 3 Ragazin A.A., Aryshenskii V., Konovalov S. etc. Study of the effect of hafnium and erbium content on the formation of microstructure in aluminium alloy 1590 cast into a copper chill mold // Obrabotka Metallov 2024. — Vol. 26. Issue 1. № 1. — P. 99-112
• 4 Zorin I., Aryshenskii E., Drits A. etc. Study of evolution of microstructure and mechanical properties in aluminum alloy 1570 with the addition of 0.5 % hafnium // Obrabotka Metallov 2024. — Vol. 26. Issue 1. № 1. — P. 113-128
• 5 Aryshenskii E.V., Lapshov M.A., Rasposienko D.Y. etc. Studying the Effect of Small Additives of Sc and Zr on the Microstructure of Al–Mg–Si Alloy with Excess Silicon during Multi-Step Heat Treatment // Physics of Metals and Metallography 2024. — Vol. 125. Issue 2. № 2. — P. 142-155
• 6 Abdulhameed Jamal I., Ali Ahmed H., Kara İsmail H. etc. Preparing Eco-friendly Composite from End-life Tires and Epoxy Resin and Examining Its Mechanical, and Acoustic Insulation Properties // International Journal of Nanoelectronics and Materials 2024. — Vol. 17. № 1.
• 7 Mahan H.M., Konovalov S.V., Shabeeb O.A. Effect of heat treatment on some mechanical properties of AA2024 aluminum alloy // AIP Conference Proceedings. — 2024. — Vol. 3105. Issue 1. № 1.
• 8 Ivanov Y.F., Gromov V.E., Konovalov S.V. etc. Evolution of Structure of AlCoCrFeNi High-Entropy Alloy on Irradiation by Pulsed Electron Beam // Technical Physics 2024. — Vol. 69. Issue 2. № 2. — P. 274-277
• 9 Zorin I.A., Dric A.M., Aryshenskii E.V. etc. STUDY ON THE EFFECT OF HAFNIUM ON MECHANICAL PROPERTIES OF HIGH-MAGNESIUM ALUMINUM ALLOYS WITH ADDED TRANSITION METALS AFTER COLD ROLLING AND FINAL ANNEALING // Tsvetnye Metally 2024. — Vol. 2024. Issue 4. № 4. — P. 71-77
• 10 Mahan H.M., Konovalov S., Al-Nedawi N.M. etc. Effect of Aging Treatment and TiO2 Nano Particles Addition on the Microstructure and Mechanical Properties of 2024 Aluminum Alloy // International Journal of Integrated Engineering 2024. — Vol. 16. Issue 1. № 1. — P. 35-44

2011

• 1 Ivanov Yu.F., Gromov V.E., Gorbunov S.V. etc. Gradient structural phase states formed in steel 08Kh18N10T in the course of high-cycle fatigue to failure // Physics of Metals and Metallography 2011. — Vol. 112. Issue 1. — P. 81-89
• 2 Filip'ev R.A., Konovalov S.V., Petrunin V.A. etc. Effect of the electric potential on the surface tension of Iron // Russian Metallurgy (Metally) 2011. — Vol. 2011. Issue 1. — P. 89-90
• 3 Kon'kov Y.D., Khasanov O.L., Volodin V.L. etc. Fatigue and corrosion resistance of bimetals after pulsed surface treatment // Steel in Translation 2011. — Vol. 41. Issue 11. — P. 969-973
• 4 Nevskii S.A., Konovalov S.V., Gromov V.E. Effect of the electric potential of the aluminum surface on stress relaxation // Technical Physics 2011. — Vol. 56. Issue 6. — P. 877-880
• 5 Petrunin V.A., Konovalov S.V., Stolboushkina O.A. etc. Effect of an electric potential on the formation of a dislocation structure during creep of aluminum // Russian Metallurgy (Metally) 2011. — Vol. 2011. Issue 5. — P. 423-428
• 6 Efimov O.Yu., Ivanov Yu.F., Konovalov S.V. etc. Gradient structural-phase states in the thermostrengthened low-carbon steel reinforcement // Materials and Manufacturing Processes 2011. — Vol. 26. Issue 1. — P. 144-146
• 7 Gromov V.E., Gorbunov S.V., Ivanov Y.F. etc. Formation of surface gradient structural-phase states under electron-beam treatment of stainless steel // Journal of Surface Investigation 2011. — Vol. 5. Issue 5. — P. 974-978
• 8 Ivanov Y.F., Koval N.N., Gorbunov S.V. etc. Multicyclic fatigue of stainless steel treated by a high-intensity electron beam: Surface layer structure // Russian Physics Journal 2011. — Vol. 54. Issue 5. — P. 575-583
• 9 Konovalov S.V., Ivanov Y.F., Stolboushkina O.A. etc. Dislocation Substructure Gradient Formation in Aluminum by Creep under Weak Potential // Arabian Journal for Science and Engineering 2011. — Vol. 36. Issue 4. — P. 649-653

2001

• 1 Konovalov, SV, Sosnin, OV, Gorlova, SN etc. Electrostimulated restoration resource during low cycle fatigue tests of steels // Mechanics and Material Engineering for Science and Experiments. — 2001. — P. 542-546
• 2 Leboshkin, BM, Bazaikin, VI, Gromov, VE etc. Microanalysis of plasticity during wire drawing // Mechanics and Material Engineering for Science and Experiments. — 2001. — P. 536-541

2002

• 1 Popova N.A., Sosnin O.V., Konovalov S.V. etc. Electropulse modification of dislocation substructure of austenite manganese steel // Fizika i Khimiya Obrabotki Materialov 2002. — Issue 5. — P. 69-75
• 2 Sosnin O.V., Kovalenko V.V., Gromov V.E. etc. Mechanisms of structure-and-phase transformations under electric stimulated low-cycle fatigue // Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya 2002. — Issue 2. — P. 31-33
• 3 Leikina O.S., Konovalov S.V., Gromov V.E. etc. Modification of the steel 45G17UZ grained structure at the fatigue testing under conditions of electrical stimulation // Proceedings of the 8th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Technique and Technologies, MTT 2002. — 2002. — P. 158-159
• 4 Sosnin O.V., Konovalov S.V., Ivanov Yu.F. etc. Evolution of the main parameters of grain structure of 45G17Yu3 steel during multicycle fatigue tests // Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya 2002. — Issue 6. — P. 53-57
• 5 Sosnin O.V., Kovalenko V.V., Tsellermaer V.V. etc. Nature of improvement in fatigue strength during electric stimulation // Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya 2002. — Issue 8. — P. 72-74
• 6 Gretskaya I.A., Konovalov S.V., Sosnin O.V. Opportunity for construction of fatigue curves from the data of ultrasonic velocity-measurement // Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya 2002. — Issue 11. — P. 77
• 7 Konovalov, SV, Sosnin, OV, Kovalenko, VV etc. Evolution of dislocation substructures at electrostimulated fatigue of steel 0.45Mn17A13 // Metallofizika i Noveishie Tekhnologii 2002. — Vol. 24. Issue 10. — P. 1351-1361
• 8 Popova N.A., Sosnin O.V., Ignatenko L.N. etc. Electron diffraction analysis of the fracture zone of Fe-0.45C-17Mn-3Al steel subjected to multicyclic fatigue tests // Russian Physics Journal 2002. — Vol. 45. Issue 3. — P. 319-328

2003

• 1 Konovalov S.V., Sosnin O.V., Ivanov Yu.F. etc. Electron microscopy analysis of 45G17Yu3 steel in case of electric-stimulated multicycle fatigue // Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya 2003. — Issue 10. — P. 65-69
• 2 Sosnin O.V., Konovalov S.V., Kovalenko S.V. etc. Structural and phase transformations in austenitic steel // Energomashinostroenie 2003. — Issue 2. — P. 25-29
• 3 Konovalov S.V., Sosnin O.V., Gorlova S.N. etc. Electrostimulated restoration resource during low cycle fatigue tests of steels // Mechanics and Material Engineering for Science and Experiments. — 2003. — P. 542-546
• 4 Leboshkin B.M., Bazaikin V.I., Gromov V.E. etc. Microanalysis of plasticity during wire drawing // Mechanics and Material Engineering for Science and Experiments. — 2003. — P. 536-541
• 5 Sosnin O.V., Ivanov Yu.F., Konovalov S.V. etc. Multicycle fatigue tests of 45G17Yu3 steel under conditions of electric stimulation. Evolution of grain ensemble // Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya 2003. — Issue 2. — P. 31-35

2004

• 1 Lejkina O.S., Sosnin O.V., Konovalov S.V. etc. Comparison of evolutions of dislocation structure in face-centered single crystals and polycrystals under fatigue // Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya 2004. — Issue 2. — P. 35-38
• 2 Konovalov S.V. Review of monograph 'Formation and evolution of steel structure and properties in the process of metal forming' by A.B. Yur'ev, V.E. Gromov, B.E.; Leboshkin a.o., Novosibirsk, Nauka, 2003. - 347 p // Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya 2004. — Issue 4. — P. 62-63
• 3 Petrunin V.A., Sosnin O.V., Konovalov S.V. etc. Electrostimulation of metals: A review // Steel in Translation 2004. — Vol. 34. Issue 6. — P. 64-68
• 4 Lejkina O.S., Ivanov Yu.F., Kozlov E.V. etc. Multi-cycle fatigue of Cr-Ni steel: Evolution of the structure and phase composition of the zone of fatigue crack growth // Fizika i Khimiya Obrabotki Materialov 2004. — Issue 5. — P. 73-78
• 5 Lejkina O.S., Konovalov S.V., Sosnin O.V. etc. Comparative analysis of role of ε-martensite in varying the fatigue strength of austenitic steels during electric stimulation // Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya 2004. — Issue 4. — P. 33-35
• 6 Semin A.P., Glezer A.M., Konovalov S.V. Improving the mechanical properties of amorphous alloys to carbide phase formation // Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya 2004. — Issue 6. — P. 75-76
• 7 Leikina O.S., Konovalov S.V., Sosnin O.V. etc. The role of ε martensite in changing the fatigue strength of austenitic steel on electrostimulation // Steel in Translation 2004. — Vol. 34. Issue 4. — P. 77-79
• 8 Petrunin V.A., Konovalov S.V., Gromov V.E. Electroplastic deformation of nanocrystalline alloys of Fe-Cr-Ni system // Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya 2004. — Issue 11. — P. 84-85
• 9 Petrunin V.A., Sosnin O.V., Konovalov S.V. etc. Modeling the processes of electrically simulated action on metals // Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya 2004. — Issue 6. — P. 30-34

2005

• 1 Sosnin O.V., Gromova A.V., Ivanov Yu.F. etc. Control of austenite steel fatigue strength // International Journal of Fatigue. — 2005. — Vol. 27. Issue 10-12. — P. 1186-1191
• 2 Vorob'ev S.V., Ivanov Yu.F., Gromova A.V. etc. Evolution of the dislocational substructures in 08Kh18N10T steel in multicyclic fatigue // Steel in Translation 2005. — Vol. 35. Issue 4. — P. 62-64
• 3 Ivanov Yu.F., Ivakhin M.P., Konovalov S.V. etc. Structure - Phase gradients in 60GS2 steel under fatigue and electrostimulation // Steel in Translation 2005. — Vol. 35. Issue 9. — P. 69-73
• 4 Danilov V.I., Konovalov S.V., Zhuravleva S.V. etc. Macrolocalization of plastic strain in creep of fine-grain aluminum // Technical Physics 2005. — Vol. 50. Issue 3. — P. 376-379

2006

• 1 Vorobyov, Sergey V., Kovalenko, Victor V., Ivanov, Yuri F. etc. Structure-phase states and fracture surface in fatigue loaded and failed austenitic stainless steel // Arabian Journal for Science and Engineering 2006. — Vol. 31. Issue 2C. — P. 39-47
• 2 Vorobyov S.V., Kovalenko V.V., Ivanov Y.F. etc. Structure-phase states and fracture surface in fatigue loaded and failed austenitic stainless steel // Arabian Journal for Science and Engineering 2006. — Vol. 31. Issue 2 C. — P. 39-47
• 3 Mikryukov V.R., Syomin A.P., Konovalov S.V. etc. Structure and hot-rolled reinforcement rods properties evolution in the process of long service life // Materials Science and Engineering A 2006. — Vol. 430. Issue 1-2. — P. 125-131

2007

• 1 Aleshina E.A., Sizova O.V., Kolubaev E.A. etc. Formation of structural-phase states of the surface of Hadfield steel // Steel in Translation 2007. — Vol. 37. Issue 12. — P. 989-990
• 2 Tsellermaer I.B., Ivanov Yu.F., Konovalov S.V. etc. Forming structural-phase states of the surface layer of steel by electron-beam treatment // Steel in Translation 2007. — Vol. 37. Issue 8. — P. 670-672
• 3 Konovalov S.V., Danilov V.I., Zuev L.B. etc. On the influence of the electrical potential on the creep rate of aluminum // Physics of the Solid State 2007. — Vol. 49. Issue 8. — P. 1457-1459

2008

• 1 Gromova A.V., Kolubaeva Yu.A., Konovalov S.V. etc. Modification of the defect substructure in a quenched steel by a low-energy high-current pulsed electron beam // Bulletin of the Russian Academy of Sciences: Physics 2008. — Vol. 72. Issue 9. — P. 1213-1216
• 2 Gromov V.E., Budovskikh E.A., Konovalov S.V. Relief of a surface, structure and phase constitution of a zone electroexplosive alloying metals // Advances in Heterogeneous Material Mechanics 2008 - Proceedings of the 2nd International Conference on Heterogeneous Material Mechanics, ICHMM 2008. — 2008. — P. 997
• 3 Vorob'ev S.V., Gromova A.V., Ivanov Yu.F. etc. Zone of fatique crack growth of stainless steel: Structure-phase states evolution // Advances in Heterogeneous Material Mechanics 2008 - Proceedings of the 2nd International Conference on Heterogeneous Material Mechanics, ICHMM 2008. — 2008. — P. 435
• 4 Efimov O.Yu., Ivanov Yu.F., Gromov V.E. etc. Nanocrystalline grains and phase composition in the plasma hardening of cast-iron rollers // Steel in Translation 2008. — Vol. 38. Issue 8. — P. 603-607
• 5 Konovalov S.V., Filip'Ev R.A., Kotova N.V. etc. Influence of weak energy stimuli on metal creep // Steel in Translation 2008. — Vol. 38. Issue 12. — P. 976-978
• 6 Ivanov Yu.F., Kolubaeva Yu.A., Konovalov S.V. etc. Modification of steel surface layer by electron beam treatment // Metal science and heat treatment. — 2008. — Vol. 50. Issue 11-12. — P. 569-574
• 7 Aleshina E.A., Ivanov Yu.F., Kolubaev A.V. etc. Gradient structure-phase states formed in Hadfield steel during dry sliding wear // Russian Physics Journal 2008. — Vol. 51. Issue 11. — P. 1168-1173
• 8 Shirinov T.M., Glezer A.M., Konovalov S.V. etc. Evolution of the structure and phase composition of an equiatomic Fe-Co alloy on quenching from the liquid state // Steel in Translation 2008. — Vol. 38. Issue 6. — P. 437-438

2009

• 1 Zuev L.B., Danilov V.I., Konovalov S.V. etc. Influence of contact potential difference and electric potential on the microhardness of metals // Physics of the Solid State 2009. — Vol. 51. Issue 6. — P. 1137-1141
• 2 Gromova A.V., Ivanov Y.F., Konovalov S.V. Evolution of the dislocation substructure in an annealed pro-eutectoid steel upon irradiation with a high-current electron beam // Russian Physics Journal 2009. — Vol. 52. Issue 5. — P. 511-518
• 3 Konovalov S.V., Ivanov Yu.F., Stolboushkina O.A. etc. Role of the electric potential in the creep acceleration and formation of Al fracture surface // Bulletin of the Russian Academy of Sciences: Physics 2009. — Vol. 73. Issue 9. — P. 1245-1248
• 4 Gromova A.V., Ivanov Y.F., Vorob'ev S.V. etc. Change of dislocation substructures upon high-cycle fatigue of stainless steel // Russian Physics Journal 2009. — Vol. 52. Issue 3. — P. 265-268
• 5 Ivanov Yuri F., Gromov Victor E., Konovalov, Sergey V. ELECTRON-BEAM MODIFICATION OF THE PEARLITE STEEL // Arabian Journal for Science and Engineering 2009. — Vol. 34. Issue 2A. — P. 219-229

2010

• 1 Konovalov S.V., Atroshkina A.A., Ivanov Yu.F. etc. Evolution of dislocation substructures in fatigue loaded and failed stainless steel with the intermediate electropulsing treatment // Materials Science and Engineering A 2010. — Vol. 527. Issue 12. — P. 3040-3043
• 2 Gromova A.V., Ivanov Y.F., Vorobyov S.V. etc. Ways of the dislocation substructure evolution in austenite steel under low and multicycle fatigue // Procedia Engineering. — 2010. — Vol. 2. Issue 1. — P. 83-90
• 3 Kovalenko V.V., Ivanov Y.F., Konovalov S.V. etc. Formation of stress field gradients during the high cycle fatigue of an austenitic corrosion-resistant steel // Russian Metallurgy (Metally) 2010. — Vol. 2010. Issue 4. — P. 268-272
• 4 Konovalov S.V., Stolboushkina O.A., Ivanov Y.F. etc. Effect of electric potential on the evolution of defect substructure and fracture surface of aluminum under creep // TMS Annual Meeting. — 2010. — Vol. 1. — P. 151-156
• 5 Danilov V.I., Zuev L.B., Konovalov S.V. etc. On the effect of electric potential on resistance of metals' surface to microindentation // Journal of Surface Investigation 2010. — Vol. 4. Issue 1. — P. 157-161
• 6 Belov E.G., Poltoratskii L.M., Efimov O.Y. etc. Formation of structure and mechanical properties in the accelerated cooling of an H beam // Steel in Translation 2010. — Vol. 40. Issue 2. — P. 114-118
• 7 Gromov V.E., Ivanov Yu.F., Stolboushkina O.A. etc. Dislocation substructure evolution on Al creep under the action of the weak electric potential // Materials Science and Engineering A 2010. — Vol. 527. Issue 3. — P. 858-861
• 8 Volodin T.V., Khasanov O.L., Konovalov S.V. etc. Acoustic emission in steel failure // Steel in Translation 2010. — Vol. 40. Issue 12. — P. 1041-1046

2012

• 1 Sizov V.V., Gromov V.E., Ivanov Y.F. etc. Fatigue failure of stainless steel after electron-beam treatment // Steel in Translation 2012. — Vol. 42. Issue 6. — P. 486-488
• 2 Kosterev V.B., Ivanov Y.F., Gromov V.E. etc. Formation of structure-phase states and dislocation substructures during thermomechanical hardening of Fe-0.09C-2Mn-1Si steel // Russian Physics Journal 2012. — Vol. 54. Issue 9. — P. 1034-1045

2023

• 1 Huang L., Chen X., Konovalov S. etc. Study on the Properties of Iron-based Alloys 17-4PH Powder Manufactured by Laser Additive Manufacturing // Current Materials Science 2023. — Vol. 16. Issue 3. № 3. — P. 352-363
• 2 Makhan Kh., Konovalov S.V., Panchenko I. Effect of heat treatment on the mechanical properties of the aluminium alloys AA2024 with nanoparticles // International Journal of Applied Science and Engineering 2023. — Vol. 20. Issue 2. № 2.
• 3 Bondareva O.S., Dobychina O.S., Dmitrieva M.O. etc. Comparative analysis of the structure and electrochemical properties of zinc coatings to predict the contact corrosion on fasteners // Chernye Metally 2023. — Vol. 2023. Issue 10. № 10. — P. 35-41
• 4 Makhan Kh., Konovalov S.V., Shabeeb O.A. Mechanical properties of hybrid composite glass fiber and kevlar fiber reinforcement with nano alumina // AIP Conference Proceedings. — 2023. — Vol. 2834. Issue 1. № 1.
• 5 Makhan Kh., Konovalov S.V., Shabeeb O.A. Enhancement of Mechanical Properties and Microstructure of Aluminium alloy AA2024 By adding TiO2 Nanoparticles // International Journal of Nanoelectronics and Materials 2023. — Vol. 16. Issue 3. № 3. — P. 481-494
• 6 Naseer Malik Abbas, Zahraa Thamer Abdulwahid, Asmaa Ali Hussien etc. Formability, Mechanical and Chemical Properties Assessment for High Strength AA7075 Subjected to Annealing Heat Treatment // Journal of Techniques 2023. — Vol. 5. № 1. — P. 16-21
• 7 Khuan L., Chen S., Konovalov S. etc. A Review of Challenges for Wire and Arc Additive Manufacturing (WAAM) // Transactions of the Indian Institute of Metals 2023. — Vol. 76. Issue 5. № 5. — P. 1123-1139
• 8 Makhan Kh., Konovalov S.V., Osincev K.A. etc. THE INFLUENCE OF TiO2 NANOPARTICLES ON THE MECHANICAL PROPERTIES AND MICROSTRUCTURE OF AA2024 ALUMINIUM ALLOY; [PREUČEVANJE VPLIVA DODAJANJA NANO DELCEV TiO2 NA MEHANSKE LASTNOSTI IN MIKROSTRUKTURO ALUMINIJEVE ZLITINE AA2024] // Materiali in Tehnologije 2023. — Vol. 57. Issue 4. № 4. — P. 379-384
• 9 Aryshenskiy E.V., Lapshov M.A., Konovalov S.V. etc. The influence of thermal treatment on microstructure and mechanical properties of the Si-rich Al–Mg–Si–Sc–Zr alloy // Frontier Materials and Technologies 2023. — Vol. 4. — P. 9-17

2013

• 1 Zagulyaev D.V., Konovalov S.V., Litvinenko N.G. etc. Peculiarities and change patterns in the copper creep kinetics in a magnetic field // Tsvetnye Metally 2013. — Issue 4. — P. 74-77
• 2 Grishunin V.A., Gromov V.E., Ivanov Y.F. etc. Evolution of the phase composition and defect substructure in the surface layer of rail steel under fatigue // Steel in Translation 2013. — Vol. 43. Issue 11. — P. 724-727
• 3 Gromov V.E., Ivanov Y.F., Sizov V.V. etc. Increase in the fatigue durability of stainless steel by electron-beam surface treatment // Journal of Surface Investigation 2013. — Vol. 7. Issue 1. — P. 94-98
• 4 Grishunin V.A., Gromov V.E., Ivanov Y.F. etc. Evolution of the phase composition and defect substructure of rail steel subjected to high-intensity electron-beam treatment // Journal of Surface Investigation 2013. — Vol. 7. Issue 5. — P. 990-995

2014

• 1 Gromov V.E., Volkov K.V., Ivanov Y.F. etc. Structure, Phase Composition, and Defective Substructure of Rails of the Highest Quality Grade // Russian Physics Journal 2014. — Vol. 57. Issue 2. — P. 259-265
• 2 Kosinov D.A., Barannikova S.A., Leboshkin B.M. etc. Influence of scale removal on the mechanical properties of low-carbon steel // Steel in Translation 2014. — Vol. 44. Issue 2. — P. 123-125
• 3 Gromov V., Yuriev A., Ivanov Y. etc. Superior quality rails: Structure-phase states and defect substructure // Advanced Materials Research. — 2014. — Vol. 1013. — P. 127-132
• 4 Ivanov Y.F., Gromov V.E., Kosinov D.A. etc. Structure of low-carbon steel sheet after scale removal // Steel in Translation 2014. — Vol. 44. Issue 4. — P. 264-267
• 5 Gromov V.E., Volkov K.V., Glezer A.M. etc. Dislocation substructures and internal stress fields in bulk- and differentially quenched rails // Bulletin of the Russian Academy of Sciences: Physics 2014. — Vol. 78. Issue 10. — P. 981-987
• 6 Barannikova S., Ivanov Y., Kosinov D. etc. Plastic deformation localization of low carbon steel: Hydrogen effect // Advanced Materials Research. — 2014. — Vol. 1013. — P. 77-83
• 7 Gromov V., Kuznetsov V., Konovalov S. etc. Estimation of current amplitude pulse // Advanced Materials Research. — 2014. — Vol. 1013. — P. 166-169
• 8 Gromov V.E., Morozov K.V., Ivanov Y.F. etc. Formation of gradients of structure, phase composition, and dislocation substructure in differentially hardened rails // Nanotechnologies in Russia 2014. — Vol. 9. Issue 5. — P. 288-292
• 9 Ivanov Yu.F., Kosinov D.A., Popova N.A. etc. Evolution of the structure and phase composition of low-carbon ferrite steel under conditions of hydrogen saturation and deformation // Bulletin of the Russian Academy of Sciences: Physics. — 2014. — Vol. 78. Issue 3. — P. 237-240
• 10 Temlyantsev M.V., Filippova M.V., Peretyat’ko V.N. etc. Inhomogeneity of the hot deformation of austenitic steel // Steel in Translation 2014. — Vol. 44. Issue 4. — P. 255-257
• 11 Gromov V.E., Morozov K.V., Ivanov Yu.F. etc. Analysis of structure and phase composition of rails subjected to differential hardening at different regimes // AIP Conference Proceedings. — 2014. — Vol. 1623. — P. 195-198

2015

• 1 Konovalov S., Gromov V., Bataev V. etc. The role of electro-explosion alloying with titanium diboride and treatment with pulsed electron beam in the surface modification of VT6 alloy // AIP Conference Proceedings. — 2015. — Vol. 1683.
• 2 Konovalov S.V., Zagulyaev D.V., Yaropolova N.G. etc. Regularities of varying the dislocation substructure of copper under creep in the magnetic field // Russian journal of non-ferrous metals 2015. — Vol. 56. Issue 4. — P. 441-448
• 3 Gromov V.E., Vorob’ev S.V., Sizov V.V. etc. Increasing the fatigue life of steel and alloys by electron-beam treatment // Steel in Translation 2015. — Vol. 45. Issue 5. — P. 322-325
• 4 Lunev A.G., Nadezhkin M.V., Konovalov S.V. etc. Strain localization parameters of AlCu4MgSi processed by high-energy electron beams // AIP Conference Proceedings. — 2015. — Vol. 1683.
• 5 Konovalov S.V., Yaropolova N.G., Zaguyliaev D.V. etc. Investigation of defect copper substructure disrupted in creep condition under the action of magnetic field // IOP Conference Series: Materials Science and Engineering. — 2015. — Vol. 91. Issue 1.
• 6 Konovalov S., Alsaraeva K., Gromov V. etc. Structure-phase states evolution in Al-Si alloy under electron-beam treatment and high-cycle fatigue // AIP Conference Proceedings. — 2015. — Vol. 1683.
• 7 Ivanov Y.F., Alsaraeva K.V., Gromov V.E. etc. Fatigue life of silumin treated with a high-intensity pulsed electron beam // Journal of Surface Investigation 2015. — Vol. 9. Issue 5. — P. 1056-1059
• 8 Gromov V.E., Ivanov Y.F., Glezer A.M. etc. Structural evolution of silumin treated with a high-intensity pulse electron beam and subsequent fatigue loading up to failure // Bulletin of the Russian Academy of Sciences: Physics 2015. — Vol. 79. Issue 9. — P. 1169-1172
• 9 Ivanov Y., Alsaraeva K., Gromov V. etc. Evolution of Al-19.4Si alloy surface structure after electron beam treatment and high cycle fatigue // Materials Science and Technology (United Kingdom) 2015. — Vol. 31. Issue 13a. — P. 1523-1529
• 10 Zagulyaev D.V., Konovalov S.V., Yaropolova N.G. etc. Effect of the magnetic field on the surface morphology of copper upon creep fracture // Journal of Surface Investigation 2015. — Vol. 9. Issue 2. — P. 410-414
• 11 Ivanov Y.F., Alsaraeva K.V., Petrikova E.A. etc. Fractography of the fatigue fracture surface of silumin irradiated by high-intensity pulsed electron beam // IOP Conference Series: Materials Science and Engineering. — 2015. — Vol. 81. Issue 1.
• 12 Gromov V.E., Vorobiev S.V., Konovalov K.V. etc. Steel fatigue life extension by pulsed electron beam irradiation // Journal of Surface Investigation 2015. — Vol. 9. Issue 3. — P. 599-603
• 13 Konovalov S.V., Alsaraeva K.V., Gromov V.E. etc. Fatigue life of silumin irradiated by high intensity pulsed electron beam // IOP Conference Series: Materials Science and Engineering. — 2015. — Vol. 91. Issue 1.
• 14 Konovalov S.V., Alsaraeva K.V., Gromov V.E. etc. Structure-phase states of silumin surface layer after electron beam and high cycle fatigue // Journal of Physics: Conference Series. — 2015. — Vol. 652. Issue 1.
• 15 Sarychev V.D., Nevskii S.A., Konovalov S.V. etc. Thermocapillary model of formation of surface nanostructure in metals at electron beam treatment // IOP Conference Series: Materials Science and Engineering. — 2015. — Vol. 91. Issue 1.

2016

• 1 Sarychev V.D., Nevskii S.A., Sarycheva E.V. etc. Viscous flow analysis of the Kelvin-Helmholtz instability for short waves // AIP Conference Proceedings. — 2016. — Vol. 1783.
• 2 Fang Y., Chen S. , Madigan B. etc. Effects of strain rate on the hot deformation behavior and dynamic recrystallization in China low activation martensitic steel // Fusion Engineering and Design 2016. — Vol. 103. — P. 21-30
• 3 Peregudov O.A., Gromov V.E., Ivanov Y.F. etc. Structural and phase states in high-quality rail // Steel in Translation 2016. — Vol. 46. Issue 4. — P. 260-263
• 4 Kobzareva T.Yu., Gromov V.E., Ivanov Yu.F. etc. Electro-Explosive Doping of VT6 Titanium Alloy Surface by Boron Carbide // IOP Conference Series: Materials Science and Engineering. — 2016. — Vol. 150. Issue 1.
• 5 Konovalov S., Komissarova I., Kosinov D. etc. Increase in Reliability of Metal Articles with Impulse Current Effect // MATEC Web of Conferences. — 2016. — Vol. 67.
• 6 Konovalov S.V., Aksenova K.V., Gromov V.E. etc. Fatigue variation of surface properties of silumin subjected to electron-beam treatment // IOP Conference Series: Materials Science and Engineering. — 2016. — Vol. 110. Issue 1.
• 7 Gromov V.E., Vorobiev S.V., Konovalov S.V. etc. Increase in fatigue life of steels by electron-beam processing // Journal of Surface Investigation 2016. — Vol. 10. Issue 1. — P. 83-87
• 8 Konovalov S., Kormyshev V., Gromov V. etc. Metallographic examination of forming improved mechanical properties via surfacing of steel HARDOX 450 with flux cored wire // Materials Science Forum. — 2016. — Vol. 870. — P. 159-162
• 9 Nevskii S., Sarychev V., Konovalov S. etc. Mathematical model of nanostructure formation in binary alloys at electron beam treatment // Materials Science Forum. — 2016. — Vol. 870. — P. 34-39
• 10 Konovalov S.V., Kormyshev V.E., Nevskii S.A. etc. Formation Wear Resistant Coatings on Martensite Steel Hardox 450 by Welding Methods // IOP Conference Series: Materials Science and Engineering. — 2016. — Vol. 142. Issue 1.
• 11 Konovalov S.V., Kormyshev V.E., Ivanov Y.F. etc. Electron-beam processing of the hardened layer formed on Hardox 450 steel electric-wire welding system Fe-C-V-Cr-Nb-W // Letters on Materials 2016. — Vol. 6. Issue 4. — P. 350-354
• 12 Sarychev V.D., Nevskii S.A., Konovalov S.V. etc. Model of nanostructure formation in rail steel during long term operation // AIP Conference Proceedings. — 2016. — Vol. 1783.
• 13 Sarychev V.D., Gromov V.E., Nevskii S.A. etc. Nanolayer formation during hydrodynamic instability under external stimuli // Steel in Translation 2016. — Vol. 46. Issue 10. — P. 679-685
• 14 Konovalov S., Komissarova I., Kosinov D. etc. Increase of fatigue life of titanium VT1-0 after electron beam treatment // Key Engineering Materials. — 2016. — Vol. 704. — P. 15-19
• 15 Ivanov Y., Gromov V., Kormyshev V. etc. Electric arc surfacing on low carbon steel: Structure and properties // AIP Conference Proceedings. — 2016. — Vol. 1783.
• 16 Konovalov S., Alsaraeva K., Gromov V. etc. The influence of electron beam treatment on Al-Si alloy structure destroyed at high-cycle fatigue // Key Engineering Materials. — 2016. — Vol. 675-676. — P. 655-659
• 17 Konovalov S.V., Komissarova I.A., Kosinov D.A. etc. Effect of electron beam treatment on structural change in titanium alloy VT-0 at high-cycle fatigue // IOP Conference Series: Materials Science and Engineering. — 2016. — Vol. 150. Issue 1.
• 18 Konovalov S.V., Kormyshev V.E., Kapralov E.V. etc. Formation of the Increased Wear-Resistant Properties of Hardox 450 Steel by Deposited Coatings // IOP Conference Series: Materials Science and Engineering. — 2016. — Vol. 150. Issue 1.
• 19 Barannikova S.A., Kosinov D.A., Zuev L.B. etc. Influence of hydrogen on the localization of plastic strain in low-carbon steel // Steel in Translation 2016. — Vol. 46. Issue 12. — P. 851-854
• 20 Zagulyaev D.V., Konovalov S.V., Shlyarov V.V. etc. Change of deformation characteristics and dislocation substructure of nonferrous metals under influence of magnetic field // IOP Conference Series: Materials Science and Engineering. — 2016. — Vol. 150. Issue 1.
• 21 Zagulyaev D., Barannikova S., Shlyarov V. etc. Effect of the 0.3 T magnetic field on the microhardness of commercially pure VT1-0 titanium // AIP Conference Proceedings. — 2016. — Vol. 1783.
• 22 Van Ya. , Chen S. , Konovalov S. Strain-stress simulation and comparison of different welding sequences during manufacturing of packing vacuum cover // IOP Conference Series: Materials Science and Engineering. — 2016. — Vol. 150. Issue 1.
• 23 Gromov V.E., Konovalov S.V., Akenova K.V. etc. Эволюция структуры и свойств легких сплавов при энергетических воздействияхНовосибирск: Издательство СО РАН, 2016. 249p.
• 24 Barannikova S.A., Ivanov Y.F., Kosinov D.A. etc. Influence of hydrogen on the localization of plastic strain in low-carbon steel during electrolytic saturation // Steel in Translation 2016. — Vol. 46. Issue 2. — P. 107-111
• 25 Konovalov S.V., Aksenova K.V., Gromov V.E. etc. Fractography of Fatigue Fracture Surface in Silumin Subjected to Electron-Beam Processing // IOP Conference Series: Materials Science and Engineering. — 2016. — Vol. 142. Issue 1.
• 26 Konovalov S.V., Kormyshev V.E., Gromov V.E. etc. Formation features of structure-phase states of Cr–Nb–C–V containing coatings on martensitic steel // Journal of Surface Investigation 2016. — Vol. 10. Issue 5. — P. 1119-1124
• 27 Ivanov Y.F., Aksenova K.V., Gromov V.E. etc. An increase in fatigue service life of eutectic silumin by electron-beam treatment // Russian journal of non-ferrous metals 2016. — Vol. 57. Issue 3. — P. 236-242
• 28 Konovalov S., Komissarova I., Kosinov D. etc. Mathematical Modelling Stress Distribution in a Metallic Plate with an Asymmetrical Notch // MATEC Web of Conferences. — 2016. — Vol. 67.

2017

• 1 Ivanov Y.F., Kormyshev V.E., Gromov V.E. etc. Structural phase states and properties of the layer surfaced on low-carbon steel with Fe‒C‒Cr‒Nb‒W powder-core wire followed by electron-beam processing // Journal of Surface Investigation 2017. — Vol. 11. Issue 5. — P. 933-939
• 2 Kormyshev V.E., Gromov V.E., Ivanov Y.F. etc. Structure and properties of the wear-resistant facing modified by electron-beam processing // Uspehi Fiziki Metallov 2017. — Vol. 18. Issue 2. — P. 111-139
• 3 Kormyshev V.E., Ivanov Y.F., Gromov V.E. etc. Nanohardness of wear-resistant surfaces after electron-beam treatment // Steel in Translation 2017. — Vol. 47. Issue 4. — P. 245-249
• 4 Konovalov S.V., Kormyshev V.E., Nevskii S.A. etc. Synthesising nanostructural wear-resistant coatings on martensite steel by welding methods // International Journal of Nanotechnology 2017. — Vol. 14. Issue 7-8. — P. 627-636
• 5 Osincev K. A. , Zagulyaev D., Konovalov S. etc. Study on mechanical properties and structure of silumin after its surface modification with yttrium oxide // AIP Conference Proceedings. — 2017. — Vol. 1909.
• 6 Konovalov S.V., Kormyshev V.E., Gromov V.E. etc. Phase composition and defect substructure of double surfacing, formed with V–Cr–Nb–W powder wire on steel // Inorganic Materials: Applied Research 2017. — Vol. 8. Issue 2. — P. 313-317
• 7 Ivanov Y.F., Belov E.G., Gromov V.E. etc. Structure-phase states, mechanical and tribological properties of thermomechanically strengthened beam // Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya 2017. — Vol. 60. Issue 6. — P. 457-462
• 8 Van Ya. , Chen S. , Konovalov S.V. Additive Manufacturing Based on Welding Arc: A low-Cost Method // Journal of Surface Investigation 2017. — Vol. 11. Issue 6. — P. 1317-1328
• 9 Konovalov S.V., Komissarova I.A., Kosinov D.A. etc. Structure of titanium alloy, modified by electron beams and destroyed during fatigue // Letters on Materials 2017. — Vol. 7. Issue 3. — P. 266-271
• 10 Konovalov S.V., Kormyshev V.E., Ivanov Y.F. etc. Structure and properties of the surface layer of a wear-resistant coating on martensitic steel after electron-beam processing // Materials Science Forum 2017. — Vol. 906. — P. 101-106
• 11 Gromov V.E., Yuriev A.A., Peregudov O.A. etc. Physical nature of surface structure degradation in long term operated rails // AIP Conference Proceedings. — 2017. — Vol. 1909.
• 12 Kormyshev V.E., Gromov V.E., Ivanov Y.F. etc. Structure and properties of the layer deposited onto a low-carbon steel and then irradiated by an electron beam // Russian Metallurgy (Metally) 2017. — Vol. 2017. Issue 7. — P. 579-584
• 13 Gromov V.E., Yuriev A.A., Ivanov Y.F. etc. Defect substructure change in 100-m differentially hardened rails in long-term operation // MATERIALS LETTERS 2017. — Vol. 209. — P. 224-227
• 14 Ivanov Y.F., Kormyshev V.E., Gromov V.E. etc. The Increase in Wear Resistance of Low Carbon Steel by Flux-Cored Wire Surfacing Followed Be Electron Beam Processing // IOP Conference Series: Materials Science and Engineering. — 2017. — Vol. 253. Issue 1.
• 15 Gromov V.E., Yur'ev A.A., Ivanov Yu.F. etc. Evolution of structure and properties of differentially quenched rails during long-term operation (../../abstract/v39/i12/1599.html) // Metallofizika i Noveishie Tekhnologii 2017. — Vol. 39. Issue 12. — P. 1599-1646
• 16 Konovalov S., Komissarova I., Chen S. etc. Gradient structure formed in commercially pure titanium irradiated with a pulsed electron beam // AIP Conference Proceedings. — 2017. — Vol. 1909.
• 17 Konovalov S., Gromov V., Ivanov Y. etc. Metallographic study on eutectic silumin // AIP Conference Proceedings. — 2017. — Vol. 1909.
• 18 Khuang L., Chen S.., Konovalov S.V. Формирование и контроль пористости во время лазерной сварки двухфазных оцинкованных сталей DP780 // МЕТАЛЛУРГИЯ: ТЕХНОЛОГИИ, ИННОВАЦИИ, КАЧЕСТВО «Металлургия – 2017». — 2017. — Pt. 2. — P. 321-327
• 19 Gromov V.E., Ivanov Y.F., Glezer A.M. etc. Electron-beam modification of a surface layer deposited on low-carbon steel by means of arc spraying // Bulletin of the Russian Academy of Sciences: Physics 2017. — Vol. 81. Issue 11. — P. 1353-1359
• 20 Voronin S., Ledyaev M., Loboda P. etc. Finite-element model for an Al+2.38% Cu+0.06% SiC composite with regard to its structural components // AIP Conference Proceedings. — 2017. — Vol. 1909.
• 21 Nosova E., Konovalov S. Dimensional changes of Al-10Mg alloy grains after quenching, deformation, and reheating // AIP Conference Proceedings. — 2017. — Vol. 1909.
• 22 Konovalov S., Zagulyaev D., Chen S. etc. Variations in defect substructure and fracture surface of commercially pure aluminum under creep in weak magnetic field // Chinese Physics B 2017. — Vol. 26. Issue 12.
• 23 Chinakhov D.A., Sarychev V.D., Granovsky A.Yu. etc. Modeling hydrodynamic flows in plasma fluxes when depositing metal layer on the surface of catalyst converters // IOP Conference Series: Earth and Environmental Science. — 2017. — Vol. 50. Issue 1.
• 24 Ivanov Y.F., Belov E.G., Gromov V.E. etc. Structure and properties of H-beams after accelerated water cooling // Steel in Translation 2017. — Vol. 47. Issue 6. — P. 369-373
• 25 Konovalov S.V., Kozyreva O.A. Педагогическое моделирование в конструктах современного образования // Tomsk State Pedagogical University Bulletin 2017. — № 1 (178). — P. 58-63
• 26 Voronin S.V., Chaplygin K. K. , Litoshina A.D. etc. Research into the structure of aluminum matrix composite AK12+2.38%Cu+0.06%SiC with a scanning probe microscope // Solid State Phenomena. — 2017. — Vol. 265 SSP. — P. 723-727
• 27 Ivanov Y., Gromov V., Konovalov S. etc. Structure and properties of strengthening layer on Hardox 450 steel // Materials Science and Technology (United Kingdom) 2017. — Vol. 33. Issue 17. — P. 2040-2045
• 28 Sarychev V.D., Granovskii A.Y., Nevskii S.A. etc. Mathematical modelling of convective processes in a weld pool under electric arc surfacing // IOP Conference Series: Materials Science and Engineering. — 2017. — Vol. 168. Issue 1.
• 29 Gromov V.E., Peregudov O.A., Ivanov Yu.F. etc. Эволюция структурно-фазовых состояний металла рельсов при длительной эксплуатацииНовосибирск: СО РАН, 2017. 164p.
• 30 Sarychev V.D., Granovskiy A.Y., Nevskii S.A. etc. Mathematical model of ultrasound transmission in gradient materials synthesized in arc surfacing under contact loading // Materials Physics and Mechanics 2017. — Vol. 32. Issue 2. — P. 186-193
• 31 Kormyshev V.E., Ivanov Y.F., Gromov V.E. etc. Surface nanohardness of wear resistant surfacing irradiated by electron beam // Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya 2017. — Vol. 60. Issue 4. — P. 304-309
• 32 Zagulyaev D.V., Osincev K. A. , Konovalov S.V. etc. Variation of Strength Characteristics of Titanium Surface Layers Under Magnetic Field Effect // Journal of Surface Investigation 2017. — Vol. 11. Issue 6. — P. 1338-1341
• 33 Sarychev V.D., Granovskii A.Y., Nevskii S.A. etc. Wear model of an excavator bucket // AIP Conference Proceedings. — 2017. — Vol. 1909.
• 34 Ivanov Y.F., Gromov V.E., Kormyshev V.E. etc. Structure and properties of a low-carbon steel surface modified by electric arc surfacing // Journal of Surface Investigation 2017. — Vol. 11. Issue 5. — P. 1050-1055
• 35 Ivanov Y.F., Konovalov S.V., Kormyshev V.E. etc. Structure and properties of Hardox 450 steel with arc welded coatings // AIP Conference Proceedings. — 2017. — Vol. 1909.
• 36 Konovalov S.V., Kosinov D.A., Komissarova I.A. etc. Effect of electropulsing on the fatigue behavior and change in the austenite steel structure // Materials Science Forum 2017. — Vol. 906. — P. 26-31
• 37 Sarychev V.D., Granovskii A.Y., Nevskii S.A. etc. Stress-strain state of gradient materials under inclined contact load // AIP Conference Proceedings. — 2017. — Vol. 1909.
• 38 Kormyshev V.E., Ivanov Y.F., Gromov V.E. etc. Intense Pulsed Electron Beam Modification of Surface Layer Facing Formed on Hardox 450 Steel by Electrocontact Method // Journal of Surface Investigation 2017. — Vol. 11. Issue 6. — P. 1342-1347
• 39 Sarychev V.D., Granovskii A.Y., Nevskii S.A. etc. Model of convection mass transfer in titanium alloy at low energy high current electron beam action // IOP Conference Series: Materials Science and Engineering. — 2017. — Vol. 168. Issue 1.
• 40 Konovalov S.V., Sarychev V.D., Nevskii S.A. etc. Mathematical model of mass transfer at electron beam treatment // AIP Conference Proceedings. — 2017. — Vol. 1800.
• 41 Konovalov S., Chen S. , Sarychev V. etc. Mathematical modeling of the concentrated energy flow effect on metallic materials // Metals 2017. — Vol. 7. Issue 1.
• 42 Osincev K.A., Komissarova I.A., Konovalov S.V. etc. Исследование с помощью атомно-силовой микроскопии структуры титана ВТ1-0, разрушенного при многоцикловой усталости после электронно-пучковой обработки // AFM investigation of titanium VT1-0 structure destroyed during multicyclic fatigue after electron-beam treatment. — 2017. — P. 159-160
• 43 Vorob’ev S.V., Glezer A.M., Sizov V.V. etc. Formation and evolution of the structure and phase composition of stainless steel during electron-beam treatment and multiple-cycle fatigue // Inorganic Materials: Applied Research 2017. — Vol. 8. Issue 4. — P. 521-527

2018

• 1 Zagulyaev D.V., Gromov V.E., Konovalov S.V. etc. Gradient structure formation in the surface layer of AK10M2N silumin by electron beam treatment // AIP Conference Proceedings. — 2018. — Vol. 2051.
• 2 Khristosova V.Yu., Bondareva O.S., Konovalov S.V. Effect of withdrawal rate and heat treatment on Ni-based superalloy microstructure // AIP Conference Proceedings. — 2018. — Vol. 2051.
• 3 Afanasyev A.V., Mel'Nikov A.A., Konovalov S.V. etc. The Analysis of the Influence of Various Factors on the Development of Stress Corrosion Defects in the Main Gas Pipeline Walls in the Conditions of the European Part of the Russian Federation // International Journal of Corrosion 2018. — Vol. 2018.
• 4 Zagulyaev D., Konovalov S., Gromov V. etc. Structure and properties changes of Al-Si alloy treated by pulsed electron beam // MATERIALS LETTERS 2018. — Vol. 229. — P. 377-380
• 5 Gromov V.E., Kormyshev V.E., Glezer A.M. etc. Microstructure and wear properties of Hardox 450 steel surface modified by Fe-C-Cr-Nb-W powder wire surfacing and electron beam treatment // IOP Conference Series: Materials Science and Engineering. — 2018. — Vol. 411. Issue 1.
• 6 Arvind Singh R., Jayalakshmi S., Sankaranarayanan S. etc. Tribological characteristics of magnesium nanocomposites // Materials Today: Proceedings. — 2018. — Vol. 5. Issue 8. — P. 16575-16579
• 7 Van Ya. , Konovalov S., Chen S. etc. Effect of applied load on welding stress at different time periods // MATEC Web of Conferences. — 2018. — Vol. 224.
• 8 Kozyr A.V., Konevtsov L.A., Konovalov S.V. etc. Research of heat resistance of the multilayer coating after electro-spark alloying of C45 steel Cr-Ni alloys // Letters on Materials 2018. — Vol. 8. Issue 2. — P. 140-145
• 9 Jayalakshmi S., Arvind Singh R., Sankaranarayanan S. etc. Structure-property correlation in magnesium nanocomposites synthesized by disintegrated melt deposition technique // Materials Today: Proceedings. — 2018. — Vol. 5. Issue 8. — P. 16280-16285
• 10 Sarychev V.D., Nevskii S.A., Granovskii A.Y. etc. Modeling of nanostructure formation in silumin during electron beam treatment // AIP Conference Proceedings. — 2018. — Vol. 2051.
• 11 Ivanov Yu.F., Gromov V.E., Konovalov Sergey Valerevich etc. Silumin structure and properties formation at electron beam treatment // Фундаментальные проблемы современного материаловедения 2018. — Vol. 15. № 4. — P. 506-512
• 12 Chen S. , Su Ch. , Wang Y. etc. Cold Metal Transfer (CMT) Based Wire and Arc Additive Manufacture (WAAM) System // Journal of Surface Investigation 2018. — Vol. 12. Issue 6. — P. 1278-1284
• 13 Ivanov Yu.F., Gromov V.E., Konovalov S.V. etc. Modification of structure and surface properties of hypoeutectic silumin by intense pulse electron beams // Uspehi Fiziki Metallov 2018. — Vol. 19. Issue 2. — P. 195-222
• 14 Konovalov S., Gromov V., Ivanov Y. Multilayer structure of Al-Si alloy after electro-explosion alloying with yttrium oxide powder // Materials Research Express 2018. — Vol. 5. Issue 11.
• 15 Khuan L. , Chen S. , Konovalov S. etc. The formation and control of porosity during laser DP780 dual-phase galvanized steels // IOP Conference Series: Materials Science and Engineering. — 2018. — Vol. 411. Issue 1.
• 16 Aryshenskii E., Hirsch J., Yashin V. etc. Influence of Local Inhomogeneity of Thermomechanical Treatment Conditions on Microstructure Evolution in Aluminum Alloys // Journal of Materials Engineering and Performance 2018. — Vol. 27. Issue 12. — P. 6780-6799
• 17 Ivanov Yu.F., Gromov V.E. , Konovalov S.V. etc. Phase Composition and Defect Substructure of Strengthening Layer Surfaced on Low Alloyed Steel // Journal of Metastable and Nanocrystalline Materials 2018. — Vol. 30. — P. 28-33
• 18 Gromov V.E., Kormyshev V.E., Glezer A.M. etc. Gradient Structure of the Layer Applied to Hardox 450 Steel by Fe–C–Cr–Nb–W Powder Wire after Electron-Beam Treatment // Steel in Translation 2018. — Vol. 48. Issue 4. — P. 229-232
• 19 Sarychev V., Nevskii S., Konovalov S. etc. Modeling of the initial stages of the formation of heterogeneous plasma flows in the electric explosion of conductors // Current Applied Physics 2018. — Vol. 18. Issue 10. — P. 1101-1107
• 20 Ivanov Yu.F., Gromov V.E., Konovalov S.V. etc. Modification of structure and surface properties of hypoeutectic silumin by intense pulse electron beams // Uspehi Fiziki Metallov 2018. — Vol. 19. Issue 2. — P. 195-222
• 21 Konovalov S., Komissarova I., Chen S. etc. The structure of the surface layer in titanium VT1-0 after high-cycle fatigue tests // IOP Conference Series: Materials Science and Engineering. — 2018. — Vol. 447. Issue 1.
• 22 Xu S., Chen S. , Konovalov S. Effect of phase transition temperature and particle size on residual stresses and properties of laser cladding layer // IOP Conference Series: Materials Science and Engineering. — 2018. — Vol. 411. Issue 1.
• 23 Konovalov S.V., Kormyshev V.E., Gromov V.E. etc. Gradient Structure Generated in Hardox 450 Steel with Built-Up Layer // Inorganic Materials: Applied Research 2018. — Vol. 9. Issue 3. — P. 427-432
• 24 Gromov V.E., Ivanov Y.F., Zagulyaev D.V. etc. A study on changes in the properties of silumin surface layers modified by yttrium oxide // IOP Conference Series: Materials Science and Engineering. — 2018. — Vol. 411. Issue 1.
• 25 Osincev K. A. , Butakova K.A., Konovalov S.V. etc. AFM investigation of silumin structure modified by Al-Y2O3 coating using the method of electric explosive alloying // IOP Conference Series: Materials Science and Engineering. — 2018. — Vol. 411. Issue 1.
• 26 Yuriev A.A., Gromov B.E., Morozov K.V. etc. Structure-phase state evolution of 100-m differentially hardened rails in long-term usage // IOP Conference Series: Materials Science and Engineering. — 2018. — Vol. 411. Issue 1.
• 27 Konovalov S.V., Zagulyaev D.V., Ivanov Y.F. etc. Effect of yttrium oxide modification of Al-Si alloy on microhardness and microstructure of surface layers // Anali Zavoda za Povijesne Znanosti Hrvatske Akademije Znanosti i Umjetnosti u Dubrovniku 2018. — Vol. 57. Issue 4. — P. 253-256
• 28 Gromov V.E., Ivanov I.F., Zagulyaev D.V. etc. Evolution of the Structure and Properties of AK10M2N Silumin under Irradiation with a High-Intensity Pulsed Electron Beam // Inorganic Materials 2018. — Vol. 54. Issue 12. — P. 1308-1314
• 29 Kozyr A.V., Konevcov L.A., Konovalov S.V. etc. Исследование жаростойких свойств покрытий после электро- искрового легирования стали 45 хромоникелевыми сплавами // Письма о материалах 2018. — Vol. 8. № 2. — P. 140-145
• 30 Ivanov Y.F., Gromov V.E., Yur’ev A.A. etc. Contributions of various mechanisms to the hardening of differentially quenched rails during long-term operation // Russian Metallurgy (Metally) 2018. — Vol. 2018. Issue 10. — P. 985-989
• 31 Gromov V.E., Yur’ev A.A., Ivanov Y.F. etc. Redistribution of Carbon Atoms in Differentially Quenched Rail on Prolonged Operation // Steel in Translation 2018. — Vol. 48. Issue 6. — P. 352-356
• 32 Konovalov S.V., Zagulyaev D.V., Ivanov Y.F. etc. Effect of yttrium oxide modification of Al-Si alloy on microhardness and microstructure of surface layers // Metalurgija 2018. — Vol. 57. Issue 4. — P. 253-256
• 33 Zagulyaev D.V., Gromov V.E., Ivanov Y.F. etc. Study of the surface relief, structure and phase composition of the silumin composite layer obtained by the method of electric explosion alloying by Al-Y 2 O 3 system // Journal of Physics: Conference Series. — 2018. — Vol. 1115. Issue 3.
• 34 Ivanov Y.F., Yur’ev A.A., Gromov V.E. etc. Transformation of Carbides in Prolonged Rail Operation // Steel in Translation 2018. — Vol. 48. Issue 2. — P. 97-103
• 35 Hristosova V., Bondareva O.S., Konovalov S.V. Influence of Zirconia powder fractional composition on microstructure and properties of thermal barrier coating obtained by thermal spraying // Materials Science Forum. — 2018. — Vol. 945 MSF. — P. 700-705
• 36 Gromov V.E., Kormyshev V.E., Glezer A.M. etc. Gradient structure of the layer faced on hardox 450 steel with Fe C – Cr – Nb – W powder wire and modified by electron beam processing // Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya 2018. — Vol. 61. Issue 4. — P. 313-318
• 37 Gromov V.E., Yur’Ev A.A., Ivanov Y.F. etc. Redistribution of carbon atoms in differentially charged rails for long-term operation // Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya 2018. — Vol. 61. Issue 6. — P. 454-459
• 38 Dzhayalakshmi S., Singkh R. Arvind, Konovalov S.V. etc. An Overview of Pulsed Electron Beam Treatment of Light Metals: Advantages and ApplicationsBoca Raton: CRC Press, 2018. 40p.
• 39 Ivanov Y.F., Yur’Ev A.A., Gromov V.E. etc. Transformation of carbide phase in rails at long-term operation // Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya 2018. — Vol. 61. Issue 2. — P. 140-148

2019

• 1 Sarychev V., Nevskii S., Konovalov S. etc. Disintegration mechanism of second phase particles under electron beams // Materials Research Express 2019. — Vol. 6. Issue 10.
• 2 Liu K., Chen S. , Zhang Y. etc. Location dependence of microstructure and mechanical properties of Cu-Al alloy fabricated by dual wire CMT // Materials Research Express 2019. — Vol. 6. Issue 12.
• 3 Ivanov Y.F., Gromov V.E., Konovalov S.V. etc. Structural-Phase State and the Properties of Silumin after Electron-Beam Surface Treatment // Russian Metallurgy (Metally) 2019. — Vol. 2019. Issue 4. — P. 398-402
• 4 Zaguliaev D., Konovalov S., Ivanov Y. etc. Effect of electron-plasma alloying on structure and mechanical properties of Al-Si alloy // Applied Surface Science 2019. — Vol. 498.
• 5 Yashin V.V., Aryshenskii E.V., Konovalov S.V. etc. Study of the specific features, characterising homogenisation of the promising Al-Mg system aluminium alloys with transition elements addition // International Journal of Nanotechnology 2019. — Vol. 16. Issue 6-10. — P. 602-612
• 6 Aryshenskii E.V., Hirsch J., Konovalov S.V. etc. Specific Features of Microstructural Evolution During Hot Rolling of the As-Cast Magnesium-Rich Aluminum Alloys with Added Transition Metal Elements // Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 2019. — Vol. 50. Issue 12. — P. 5782-5799
• 7 Zhang C., Lv P., Xia H. etc. The microstructure and properties of nanostructured Cr-Al alloying layer fabricated by high-current pulsed electron beam // Vacuum 2019. — Vol. 167. — P. 263-270
• 8 Yashin V., Aryshenskii E., Hirsch J. etc. Study of recrystallization kinetics in AA5182 aluminium alloy after deformation of the as-cast structure // Materials Research Express 2019. — Vol. 6. Issue 6.
• 9 Chen S. , Liu K., Guo W. etc. The fabrication of NiTi shape memory alloy by selective laser melting: a review // RAPID PROTOTYPING JOURNAL 2019. — Vol. 25. Issue 8. — P. 1421-1432
• 10 Ivanov Y.F., Gromov V.E., Zagulyaev D.V. etc. Formation and Evolution of Structure and Phase Composition of Hypoeutectoid Silumin on Electron Beam Processing // Journal of Surface Investigation 2019. — Vol. 13. Issue 5. — P. 809-813
• 11 Romanov D., Moskovskii S., Konovalov S. etc. Improvement of copper alloy properties in electro-explosive spraying of ZnO-Ag coatings resistant to electrical erosion // Journal of Materials Research and Technology 2019. — Vol. 8. Issue 6. — P. 5515-5523
• 12 Ivanov Y.F., Gromov V.E., Zagulyaev D.V. etc. The structure and properties of a hypoeutectic silumin subjected to complex electron–ion-plasma processing // Uspehi Fiziki Metallov 2019. — Vol. 20. Issue 4. — P. 634-671
• 13 Sarychev V.D., Nevskii S.A., Granovskii A.Y. etc. Combined Rayleigh-Taylor-Kelvin-Helmholtz instability and its role in the formation of the surface relief of the coating/substrate // AIP Conference Proceedings. — 2019. — Vol. 2167.
• 14 Konovalov S., Komissarova I., Ivanov Y. etc. Structural and phase changes under electropulse treatment of fatigue-loaded titanium alloy VT1-0 // Journal of Materials Research and Technology 2019. — Vol. 8. Issue 1. — P. 1300-1307
• 15 Zagulyaev D., Konovalov S., Shlyarov V. etc. Influence of constant magnetic field on plastic characteristics of paramagnetic metals // Materials Research Express 2019. — Vol. 6. Issue 9.
• 16 Zaguliaev D., Konovalov S., Ivanov Y. etc. Microstructure and mechanical properties of doped and electron-beam treated surface of hypereutectic Al-11.1%Si alloy // Journal of Materials Research and Technology 2019. — Vol. 8. Issue 5. — P. 3835-3842
• 17 Gromov V.E., Yur’ev A.A., Ivanov Y.F. etc. Formation of Gradient Structure–Phase States in the Surface Layers of 100-m Differentially Quenched Rails // Russian Metallurgy (Metally) 2019. — Vol. 2019. Issue 7. — P. 710-715
• 18 Evgenii A., Erkin B., Hirsch J. etc. Development of the new fast approach for calculation of texture evolution during hot deformation of aluminum alloys // Procedia Manufacturing. — 2019. — Vol. 37. — P. 492-499
• 19 Van Ya. , Chen S. , Konovalov S. etc. In-situ wire-feed additive manufacturing of Cu-Al alloy by addition of silicon // Applied Surface Science 2019. — Vol. 487. — P. 1366-1375
• 20 Tian N., Li S., Zhang C. etc. The surface modification of aluminum by mechanical milling of Pb coating and high current pulsed electron beam irradiation // Materials Research Express 2019. — Vol. 6. Issue 12.
• 21 Arvind Singh R., Jayalakshmi S., Sankaranarayanan S. etc. Investigating and Understanding the Mechanical and Tribological Properties of a Magnesium Hybrid Metal–Ceramic Nanocomposite // Minerals, Metals and Materials Series. — 2019. — P. 85-94
• 22 Zagulyaev D.V., Gromov V.E., Konovalov S.V. etc. Wear Resistance of the Surface Layers in Silumin after Electron-Beam Treatment // Russian Metallurgy (Metally) 2019. — Vol. 2019. Issue 10. — P. 981-985
• 23 Yashin V.V., Aryshenskii E.V., Konovalov S.V. etc. A Study of Texture Component Distribution Over the Cross Section of an Aluminum Alloy 8011 Billet with Hot Rolling in a Four-Stand Continuous Group // Metal science and heat treatment 2019. — Vol. 61. Issue 5-6. — P. 300-304
• 24 Ivanov Yu.F., Gromov V.E., Zagulyaev D.V. etc. Nanostructure formation of hypoeutectic silumin by electronion-plasma methods // Journal of Physics: Conference Series. — 2019. — Vol. 1393. Issue 1.
• 25 Ivanov Yu.F., Gromov V.E., Zagulyaev D.V. etc. Nanostructurisation of hypoeutectic silumin by electroexplosion alloying and subsequent electron beam processing // International Journal of Nanotechnology 2019. — Vol. 16. Issue 6-10. — P. 619-628
• 26 Chen S. , Xu H., Xu G. etc. Stress and temperature distribution simulation for arc weld-based rapid prototyping of titanium alloy TC4 // MATERIALS EXPRESS 2019. — Vol. 9. Issue 2. — P. 99-111
• 27 Konovalov S., Shunqi M., Osincev K. A. etc. Change in Plasticity of Copper under Weak Electrical Potentials // IOP Conference Series: Materials Science and Engineering. — 2019. — Vol. 472. Issue 1.
• 28 Zaguliaev D., Konovalov S., Ivanov Y. etc. Microstructure and micro-hardness behavior of Ti–Y2O3 –Al–Si composite coatings prepared in electron-plasma alloying // MATERIALS CHARACTERIZATION 2019. — Vol. 158.
• 29 Komissarova I.A., Osincev K.A., Kryukova E.D. etc. Влияние электрического потенциала малой величины на микротвердость технически чистого титана // Basic Problems of Material Science 2019. — Vol. 16. № 3. — P. 344-348
• 30 Zagulyaev D., Konovalov S., Gromov V. etc. Research into morphology and phase structure in the surface of Al-Si alloy modified by yttrium oxide // Bulletin of the Polish Academy of Sciences: Technical Sciences 2019. — Vol. 67. Issue 2. — P. 173-177
• 31 Sarychev V., Nevskii S., Konovalov S. etc. Thermocapillary model of formation of nanostructures on the surface irradiated by low-energy high-current electron beams // Materials Research Express 2019. — Vol. 6. Issue 7.
• 32 Gromov V., Konovalov S., Ivanov Y. etc. Evolution of structure-phase states of hypoeutectic silumin irradiated by intensive pulse electron beams // Materials Research Express 2019. — Vol. 6. Issue 7.
• 33 Sarychev V., Nevskii S., Konovalov S. etc. Model of nanostructure formation in Al-Si alloy at electron beam treatment // Materials Research Express 2019. — Vol. 6. Issue 2.
• 34 Aryshenskii E., Khirsh Yu. R. , Yashin V. etc. Study of the recrystallization behaviour of the aluminium 1565ch alloy during hot rolling of the as cast structures // Materials Research Express 2019. — Vol. 6. Issue 7.
• 35 Ivanov Y.F., Gromov V.E., Konovalov S.V. etc. Formation of Structure and Properties of Silumin on Electron-Beam Processing // Journal of Surface Investigation 2019. — Vol. 13. Issue 6. — P. 1040-1044
• 36 Zagulyaev D.V., Gromov V.E., Konovalov S.V. etc. Increase in Wear Resistance of the Surface Layers of AK10M2N Silumin at Electron-Beam Treatment // Inorganic Materials: Applied Research 2019. — Vol. 10. Issue 3. — P. 622-628
• 37 Aryshenskii E.V., Aryshenskii V.Y., Beglov E.D. etc. Investigation of subgrain and fine intermetallic participles size impact on grain boundary mobility in aluminum alloys with transitional metal addition // Materials Today: Proceedings. — 2019. — Vol. 19. — P. 2183-2188
• 38 Zagulyaev D.V., Ivanov Y.F., Glezer A.M. etc. Effect of the Density of Electron Beam Energy on the Structure and Mechanical Characteristics of Surface Layers of Hypoeutectic Silumin // Bulletin of the Russian Academy of Sciences: Physics 2019. — Vol. 83. Issue 10. — P. 1282-1288
• 39 Petrikova E.A., Teresov A.D., Rygina M.E. etc. Microdiffraction analysis of structure of silumin's high-velocity cellular crystallization // Journal of Physics: Conference Series. — 2019. — Vol. 1393. Issue 1.
• 40 Konovalov S., Gromov V., Zaguliyaev D. etc. Dispersion of Al-Si alloy structure by intensive pulsed electron beam // ARCHIVES OF FOUNDRY ENGINEERING 2019. — Vol. 19. Issue 2. — P. 79-84

2020

• 1 Ali M., Anjum S., Siddiquee A.N. etc. Defect formation during dissimilar aluminium friction stir welded T-joints // Mechanics and Industry 2020. — Vol. 21. Issue 2.
• 2 Deev V., Prusov E., Shurkin P. etc. Effect of La addition on solidification behavior and phase composition of cast Al-Mg-Si Alloy // Metals 2020. — Vol. 10. Issue 12. — P. 1-12
• 3 Su Ch., Konovalov Sergey Valerevich, Chen S. Laser melting deposited CoCrFeNiMn high-entropy alloy: porosity, microstructure and mechanical properties // Тринадцатое ежегодное заседание Научного Совета РАН по физике конденсированных сред и научно-практический семинар «Актуальные проблемы физики конденсированных сред». — 2020. — P. 59
• 4 Van Ya., Konovalov Sergey Valerevich, Chen S. Influence of Si, Mg and Mn on the microstructure and mechanical properties of cu-al manufactured by cold metal transfer welding // Тринадцатое ежегодное заседание Научного Совета РАН по физике конденсированных сред и научно-практический семинар «Актуальные проблемы физики конденсированных сред». — 2020. — P. 60
• 5 Konovalov S., Osincev K. A. , Golubeva A. etc. Surface modification of Ti-based alloy by selective laser melting of Ni-based superalloy powder // Journal of Materials Research and Technology 2020. — Vol. 9. Issue 4. — P. 8796-8807
• 6 Nevskii S.A., Simonov Y.N., Kormyshev V.E. etc. Simulation of phase transformations in high carbon pearlite steel at various cooling rates // CIS IRON AND STEEL REVIEW 2020. — Vol. 20. — P. 55-60
• 7 Konovalov S., Zaguliaev D., Ivanov Y. etc. Modification of Al-10Si-2Cu alloy surface by intensive pulsed electron beam // Journal of Materials Research and Technology 2020. — Vol. 9. Issue 3. — P. 5591-5598
• 8 Zaguliaev D., Konovalov S., Ivanov Y. etc. Microstructure and microhardness of piston alloy Al-10Si-2Cu irradiated by pulsed electron beam // ARCHIVES OF FOUNDRY ENGINEERING 2020. — Vol. 20. Issue 3. — P. 92-98
• 9 Gen Ya., Konovalov S.V., Osincev K.A. etc. Влияние параметров процесса на пористость Ti-6Al-4V, изготовленного методом селективного лазерного плавления // XX Международная научно-техническая конференция "Уральская школа-семинар металловедов - молодых ученых". — 2020. — P. 574-575
• 10 Osincev K. A. , Komissarova I.A., Konovalov S.V. etc. The influence of electrical potential on the mechanical properties of commercially pure titanium // Letters on Materials 2020. — Vol. 10. Issue 4. — P. 512-516
• 11 Jayalakshmi S., Singh R.A., Chen S. etc. Role of Matrix Microstructure in Governing the Mechanical Behavior and Corrosion Response of Two Magnesium Alloy Metal Matrix Composites // JOM 2020. — Vol. 72. Issue 8. — P. 2882-2891
• 12 Zaguliaev D., Gromov V., Rubannikova Y. etc. Structure and phase states modification of AL-11SI-2CU alloy processed by ion-plasma jet and pulsed electron beam // Surface and Coatings Technology 2020. — Vol. 383.
• 13 Chen D., Konovalov S., Vasileva A. A. etc. Microstructural characterization of coatings produced by selective laser melting of Ni-powder on titanium alloy substrate // International Journal of Mechanical Engineering and Robotics Research 2020. — Vol. 9. Issue 7. — P. 954-959
• 14 Zaguliaev D., Ivanov Y., Konovalov S. etc. Effect of electron-plasma treatment on the microstructure of al-11wt%Si alloy // Materials Research 2020. — Vol. 23. Issue 2.
• 15 Golubeva A.A., Konovalov S.V., Ivanov Y.F. etc. Layer-by-Layer Analysis of the Cr–Ni–Ti Coating Substructure Obtained via Selective Laser Melting // Journal of Surface Investigation 2020. — Vol. 14. Issue 5. — P. 1022-1028
• 16 Zagulyaev D.V., Gromov V.E., Konovalov Sergey Valerevich etc. Electron-Ion-Plasma Modification of a Hypoeutectoid Al-Si AlloyBoca Raton: Taylor & Francis, 2020. 268p.
• 17 Chen S. , Fang Y., Zhao S. etc. Electrochemical Corrosion Behavior of X65 Pipeline Steel Joints Welded by Low Temperature Phase Transformation Electrodes // Journal of Surface Investigation 2020. — Vol. 14. Issue 5. — P. 1097-1111
• 18 Konovalov S., Ivanov Y., Gromov V. etc. Fatigue-induced evolution of AISI 310S steel microstructure after electron beam treatment // Materials 2020. — Vol. 13. Issue 20. — P. 1-13
• 19 Zhukov D. V. , Konovalov S.V. Express quality analysis of metal structure based on thickness data // AIP Conference Proceedings. — 2020. — Vol. 2315.
• 20 Sarychev V.D., Nevskii S.A., Granovskii A.Y. etc. Combined kelvin-helmholtz and marangoni instability and its role in formation of nanostructures under electron-beam irradiation // AIP Conference Proceedings. — 2020. — Vol. 2310.
• 21 Gen Ya., Konovalov Sergey Valerevich, Chen S. The effect of electron beam parameters on microstructure and Properties of aluminum alloys // XI Международная конференция «Фазовые превращения и прочность кристаллов», памяти академика Г.В. Курдюмова. — 2020. — P. 129
• 22 Van Ya., Konovalov Sergey Valerevich, Chen S. The research of Fe–Cr–Al alloy ade by wire are additive manufacturing technology // XI Международная конференция «Фазовые превращения и прочность кристаллов», памяти академика Г.В. Курдюмова. — 2020. — P. 130
• 23 Gen Ya. , Konovalov S.V., Chen S. Research status and application of the high-entropy and traditional alloys fabricated via the laser cladding // Uspehi Fiziki Metallov 2020. — Vol. 21. Issue 1. — P. 26-45
• 24 Mohan S., Anand A., Arvind Singh R. etc. Friction and wear study of Fe-Cu-C-CaF2 self-lubricating composite at high speed and high temperature // IOP Conference Series: Materials Science and Engineering. — 2020. — Vol. 834. Issue 1.
• 25 Zhukov D. V. , Konovalov S., Afanasyev A. Morphology and development dynamics of rolled steel products manufacturing defects during long-term operation in main gas pipelines // ENGINEERING FAILURE ANALYSIS 2020. — Vol. 109.
• 26 Konovalov S.V., Komissarova I.A., Gleser A.M. etc. Effect of Electron-Beam Treatment on the Structure of Commercial-Purity Titanium Subjected to Fatigue Failure // Russian Metallurgy (Metally) 2020. — Vol. 2020. Issue 4. — P. 401-407
• 27 Ivanov Y.F., Gromov V.E., Zaguliaev D.V. etc. Prospects for the application of surface treatment of alloys by electron beams in state-of-the-art technologies // Uspehi Fiziki Metallov 2020. — Vol. 21. Issue 3. — P. 345-362
• 28 Liu K., Chen S. , Shen Q. etc. Microstructural evolution and mechanical properties of deep cryogenic treated Cu–Al–Si alloy fabricated by Cold Metal Transfer (CMT) process // MATERIALS CHARACTERIZATION 2020. — Vol. 159.
• 29 Sarychev V., Nevskii S., Konovalov S. etc. Mechanism of silicon plate decay in aluminum matrix under electron beam effect // Key Engineering Materials. — 2020. — Vol. 839 KEM. — P. 32-36
• 30 Nevskii S., Sarychev V., Konovalov S. etc. Formation mechanism of micro- and nanocrystalline surface layers in titanium and aluminum alloys in electron beam irradiation // Metals 2020. — Vol. 10. Issue 10. — P. 1-14
• 31 Nevskii S., Sarychev V., Konovalov S. etc. Wave instability on the interface coating/substrate material under heterogeneous plasma flows // Journal of Materials Research and Technology 2020. — Vol. 9. Issue 1. — P. 539-550

2021

• 1 Zhang Y., Shen Q., Chen S. etc. Strengthening mechanisms in cocrfenix0.4 (al, nb, ta) high entropy alloys fabricated by powder plasma arc additive manufacturing // NANOMATERIALS 2021. — Vol. 11. Issue 3. — P. 1-14
• 2 Aryshenskii E., Hirsch J., Konovalov S. etc. Influence of mg content on texture development during hot plain-strain deformation of aluminum alloys // Metals 2021. — Vol. 11. Issue 6.
• 3 Van Ya. , Konovalov S., Chen S. etc. Influence of Silicon and Manganese on the Mechanical Properties of Additive Manufactured Cu–Al Alloys by Cold Metal Transfer Welding // Metallography, Microstructure, and Analysis 2021. — Vol. 10. Issue 3. — P. 314-320
• 4 Gen Ya. , Panchenko I., Konovalov S. etc. Effect of electron beam energy densities on the surface morphology and tensile property of additively manufactured Al-Mg alloy // Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms 2021. — Vol. 498. — P. 15-22
• 5 Gromov V.E., Konovalov S.V., Ivanov Y.F. etc. Mechanical Properties and Mechanisms of Deformation of High Entropy Alloys // Advanced Structured Materials 2021. — Vol. 107. — P. 33-52
• 6 Gromov V., Ivanov Y., Konovalov S. etc. Modification of high-entropy alloy AlCoCrFeNi by electron beam treatment // JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T 2021. — Vol. 13. — P. 787-797
• 7 Osincev K. A. , Gromov V., Ivanov Y. etc. Evolution of structure in alcocrfeni high-entropy alloy irradiated by a pulsed electron beam // Metals 2021. — Vol. 11. Issue 8.
• 8 Osincev K. A. , Gromov V.E., Konovalov S.V. etc. Effect of Pulsed-Electron-Beam Irradiation on the Surface Structure of a Non-Equiatomic High-Entropy Alloy of the Al–Co–Cr–Fe–Ni System // Journal of Surface Investigation 2021. — Vol. 15. Issue 4. — P. 846-850
• 9 Aryshenskii E., Lapshov M., Hirsch J. etc. Influence of the small sc and zr additions on the as‐cast microstructure of al–mg–si alloys with excess silicon // Metals 2021. — Vol. 11. Issue 11.
• 10 Zhukov D. V. , Konovalov S.V., Melnikov A.A. etc. Metallography of non-metallic inclusions in pipe metal and impact assessment of defect structures on non-destructive testing outcomes // CIS IRON AND STEEL REVIEW 2021. — Vol. 21. — P. 58-63
• 11 Gromov V.E., Konovalov S.V., Ivanov Y.F. etc. Methods of Manufacturing the High-Entropy Alloys // Advanced Structured Materials 2021. — Vol. 107. — P. 1-31
• 12 Aryshenskii E., Beglov E., Konovalov S. etc. Approach to oriented grain growth accounting during aluminum alloys recrystallization simulation // Materials Today: Proceedings. — 2021. — Vol. 46. — P. 957-960
• 13 Osincev K.A., Konovalov S.V., Zagulyaev D.V. etc. Wire-arc additive manufacturing of 25.1Co-15.1Cr-37.8Fe-3.4Mn-16.3Ni non-equiatomic high entropy alloy // III International Conference and School of Young Scientists "Synthesis, Structure, and Properties of High-entropy Materials". — 2021. — P. 67-68
• 14 Gen Ya. , Panchenko I.A., Chen S. etc. Pulsed-Electron-Beam Modification of The Surface of Al–Mg Alloy Samples Obtained by the Methods of Additive Technologies: Structure and Properties // Journal of Surface Investigation 2021. — Vol. 15. Issue 3. — P. 449-452
• 15 Osincev K. A. , Konovalov S., Gromov V. etc. Phase composition prediction of Al-Co-Cr-Fe-Ni high entropy alloy system based on thermodynamic and electronic properties calculations // Materials Today: Proceedings. — 2021. — Vol. 46. — P. 961-965
• 16 Haq M.I.U., Mohan S., Raina A. etc. Mechanical and Tribological Properties of Aluminum Based Metal Matrix Nanocomposites // Encyclopedia of Materials: Composites 2021. — Vol. 1. — P. 402-414
• 17 Gromov V.E., Konovalov S.V., Ivanov Y.F. etc. Prospects of High-Entropy Alloys Application // Advanced Structured Materials 2021. — Vol. 107. — P. 59-62
• 18 Zaguliaev D.V., Konovalov S.V., Ivanov Yu.F. etc. The effect of high-intensity electron beam on the crystal structure, phase composition, and properties of al-si alloys with different silicon content // Uspehi Fiziki Metallov 2021. — Vol. 22. Issue 1. — P. 129-157
• 19 Gen Ya. , Panchenko I., Chen S. etc. Investigation of Microstructure and Fracture Mechanism of Al-5.0Mg Alloys Fabricated by Wire Arc Additive Manufacturing // Journal of Materials Engineering and Performance 2021. — Vol. 30. Issue 10. — P. 7406-7416
• 20 Osincev K.A., Shlyarov V.V., Chen S. etc. Влияние магнитного поля на микроструктуру, микротвердость и коррозионные свойства стали 9CRMOV-N изготовленной методом проволочно-дугового аддитивного производства // Международная научно-практическая конференция "Металлургия: технологии, инновации, качество". — 2021. — Pt. 1. — P. 240-247
• 21 Zhang Y., Chen S. , Jayalakshmi S. etc. Replacement of Ta with equi-atomic radius Nb atoms in CoCrFeNiTa high entropy alloys: Effect on microstructure and mechanical properties // MATERIALS LETTERS 2021. — Vol. 297.
• 22 Zhukov D. V. , Konovalov S., Melnikov A. etc. Evaluation of strength and microstructure of welded pipes with wall lamination // ENGINEERING FAILURE ANALYSIS 2021. — Vol. 122.
• 23 Voronin S.V., Danilushkin V. S. , Tregub V.I. etc. Computer Simulation of the Process of Crack Propagation in a Brittle Porous Material // Journal of Surface Investigation 2021. — Vol. 15. Issue 6. — P. 1212-1216
• 24 Aryshenskii E.V., Hirsch J., Beglov E.D. etc. Specific of the recrystallization driving force calculation on the early stages of thermomechanical treatment of aluminum alloys // Materials Science Forum. — 2021. — Vol. 1037 MSF. — P. 273-280
• 25 Aryshenskii E., Lapshov M., Konovalov S. etc. The casting rate impact on the microstructure in al–mg–si alloy with silicon excess and small zr, sc additives // Metals 2021. — Vol. 11. Issue 12.
• 26 Van Ya., Konovalov S.V., Chen S. etc. Microstructure and Mechanical Properties of Cu–Al Alloy Deposited by Additive Manufacturing // Materials Highlights 2021. — Vol. 2. Issue 3. — P. 46-51
• 27 Zaguliaev D., Ivanov Y., Konovalov S. etc. Effect of pulsed electron beam treatment on microstructure and functional properties of Al-5.4Si-1.3Cu alloy // Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms 2021. — Vol. 488. — P. 23-29
• 28 Gen Ya., Panchenko I.A, Konovalov S.V. etc. The research of microstructure and properties of Al-5Mg alloy fabricated by wire arc additive manufacturing // Международная конференция «Физика и технологии перспективных материалов-2021». — 2021. — P. 104
• 29 Konovalov S.V., Ivanov Y.F., Zaguliaev D.V. etc. Structural Changes in the Surface of AK5M2 Alloy under the Influence of an Intense Pulsed Electron Beam // Journal of Surface Investigation 2021. — Vol. 15. Issue 1. — P. 183-189
• 30 Chen S., Konovalov Sergey Valerevich, Gromov V.E. etc. Surface Processing of Light Alloys Subject to Concentrated Energy FlowsSingapore: Springer, 2021. 217p.
• 31 Khuan L. , Chen S. , Konovalov S. etc. The effect of wire feeding speed on solidification cracking of cmt welding for al-si alloys // Metals 2021. — Vol. 11. Issue 2. — P. 1-13
• 32 Osincev K. A. , Konovalov S.V., Glezer A.M. etc. Research on the structure of Al2.1Co0.3Cr0.5FeNi2.1 high-entropy alloy at submicro- and nano-scale levels // MATERIALS LETTERS 2021. — Vol. 294.
• 33 Aryshenskii E., Hirsch J., Konovalov S. Investigation of the intermetallic compounds fragmentation impact on the formation of texture during the as cast structure thermomechanical treatment of aluminum alloys // Metals 2021. — Vol. 11. Issue 3. — P. 1-30
• 34 Su Ch. , Chen S. , Konovalov S. etc. Effect of Deposition Strategies on the Microstructure and Tensile Properties of Wire Arc Additive Manufactured Al-5Si Alloys // Journal of Materials Engineering and Performance 2021. — Vol. 30. Issue 3. — P. 2136-2146
• 35 Van Ya. , Konovalov S., Chen S. etc. Deformation Behavior of Cu-6.5 wt.% Al Alloy Under Quasi-Static Tensile Loading // Journal of Materials Engineering and Performance 2021. — Vol. 30. Issue 7. — P. 5086-5092
• 36 Ivanov Y.F., Osincev K. A. , Gromov V.E. etc. Deformation behavior of high-entropy alloy system Al - Co - Cr - Fe - Ni Achieved by wire-arc additive manufacturing // Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya 2021. — Vol. 64. Issue 1. — P. 68-74
• 37 Romanov D., Sosnin K., Pronin S. etc. Electroexplosive hafnium coating on titanium implant modified by nitrogen ions and electron beam processing // Surface and Coatings Technology 2021. — Vol. 409.
• 38 Van Ya. , Konovalov S., Chen S. etc. Research on Cu-6.6%Al-3.2%Si Alloy by Dual Wire Arc Additive Manufacturing // Journal of Materials Engineering and Performance 2021. — Vol. 30. Issue 3. — P. 1694-1702
• 39 Van Ya. , Su Ch. , Konovalov S. Microstructure and Mechanical Properties of Cu-6.5%Al Alloy Deposited by Wire Arc Additive Manufacturing // Metallography, Microstructure, and Analysis 2021. — Vol. 10. Issue 5. — P. 634-641
• 40 Gromov V.E., Konovalov S.V., Ivanov Y.F. etc. HEAs’ Stability // Advanced Structured Materials 2021. — Vol. 107. — P. 53-57
• 41 Jacob A., Maheshwari S., Siddiquee A.N. etc. The effects of in-process cooling during friction stir welding of 7475 aluminium alloy // SAINS MALAYSIANA 2021. — Vol. 50. Issue 9. — P. 2743-2754
• 42 Osincev K. A. , Gromov V.E., Konovalov S.V. etc. High-entropy alloys: Structure, mechanical properties, deformation mechanisms and application // Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya 2021. — Vol. 64. Issue 4. — P. 249-258
• 43 Khuan L., Konovalov S.V., Su Ch. Mechanical forming mechanism of solidification crack initiation and propagation in CMT welding of aluminum alloy // Международная научно-практическая конференция "Материалы и методы инновационных научно-практических исследований и разработок". — 2021. — P. 25-28
• 44 Gangil N., Maheshwari S., Siddiquee A.N. etc. Microstructural characterization and tribological behavior of surface composites fabricated on AA7050-T7451 alloy via friction stir processing // Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 2021. — Vol. 235. Issue 2. — P. 351-359
• 45 Van Ya. , Konovalov S., Chen S. etc. Influence of Silicon and Magnesium on the Mechanical Properties of Additive Manufactured Cu-Al Alloy // 3D Printing and Additive Manufacturing 2021. — Vol. 8. Issue 5. — P. 331-339
• 46 Nevskii S.A., Konovalov S.V., Osincev K. A. etc. The mechanism of formation of surface micro-and nanostructures in the alcocrfeni high-entropy alloy during electron-beam treatment // Letters on Materials 2021. — Vol. 11. Issue 3. — P. 309-314
• 47 Gromov V.E., Rubannikova Yu.A., Konovalov S.V. etc. Generation of increased mechanical properties of Cantor high-entropy alloy // Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya 2021. — Vol. 64. Issue 8. — P. 599-605
• 48 Gromov V.E., Konovalov S.V., Ivanov Y.F. etc. Prediction of Phase Composition of Al-Co-Cr-Fe-Ni System High-Entropy Alloy // Advanced Structured Materials 2021. — Vol. 107. — P. 63-77
• 49 Ivanov Y.F., Gromov V.E., Konovalov S.V. etc. Structural Phase Variations in High-Entropy Alloy upon Pulsed Electron Beam Irradiation // Steel in Translation 2021. — Vol. 51. Issue 11. — P. 788-794
• 50 Deev V., Prusov E., Ri E. etc. Effect of melt overheating on structure and mechanical properties of al-mg-si cast alloy // Metals 2021. — Vol. 11. Issue 9.
• 51 Gromov V.E., Shlyarova Y.A., Konovalov S.V. etc. Application of High-Entropy Alloys // Steel in Translation 2021. — Vol. 51. Issue 10. — P. 700-704
• 52 Zhukov D. V. , Chaplygin K. K. , Konovalov S.V. etc. Subsurface Corrosion as the Main Degradation Process of 17GS Pipeline Steel after 50 Years of Operation // Journal of Surface Investigation 2021. — Vol. 15. Issue 4. — P. 872-876
• 53 Osincev K. A. , Konovalov S., Gromov V. etc. Microstructural and mechanical characterisation of non-equiatomic Al2.1Co0.3Cr0.5FeNi2.1 high-entropy alloy fabricated via wire-arc additive manufacturing // Philosophical Magazine Letters 2021. — Vol. 101. Issue 9. — P. 353-359
• 54 Ivanov Y.F., Osincev K. A. , Gromov V.E. etc. Deformation Behavior of a High-Entropy Al–Co–Cr–Fe–Ni Alloy Fabricated by Means of Wire-Arc Additive Manufacturing // Steel in Translation 2021. — Vol. 51. Issue 1. — P. 27-32
• 55 Ivanov Y.F., Gromov V.E., Zagulyaev D.V. etc. Increase of alloys functional properties by electronic beam processing // Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya 2021. — Vol. 64. Issue 2. — P. 129-134
• 56 Gromov V.E., Ivanov Y.F., Konovalov S.V. etc. Effect of electron beam treatment on the structure and properties of AlCoCrFeNi high-entropy alloy // CIS IRON AND STEEL REVIEW 2021. — Vol. 22. — P. 72-76
• 57 Ivanov Y.F., Gromov V.E., Konovalov S.V. etc. Structural phase variations in high-entropy alloy at irradiation by pulsed electron beam // Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya 2021. — Vol. 64. Issue 11. — P. 846-854
• 58 Gromov V.E., Shlyarova Y.A., Konovalov S.V. etc. Application of high-entropy alloys // Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya 2021. — Vol. 64. Issue 10. — P. 747-754
• 59 Zhukov D.V., Melnikov A.A., Konovalov S.V. etc. Analysis of manufacturing internal pressure induced defects of the pipe wall with modeling of stresses // Chernye Metally 2021. — Issue 10. — P. 49-55
• 60 Sonar T., Balasubramanian V., Venkateswaran T. etc. Potentiodynamic corrosion behavior and microstructural features of gas tungsten constricted arc (GTCA)-welded superalloy 718 joints // MATERIALS TESTING 2021. — Vol. 63. Issue 12. № 12. — P. 1116-1123
• 61 Gen Ya., Panchenko I.A, Chen S. etc. Phase composition of additively manufactured Al-Mg alloy treated by electron beam // XXII Международная научно-практическая конференция «Металлургия: технологии, инновации, качество» «Металлургия 2021». — 2021. — Pt. 2. — P. 16-18
• 62 Gromov V.E., Konovalov S.V., Ivanov Y.F. etc. High-Entropy Alloys of AlCoCrFeNi-System // Advanced Structured Materials 2021. — Vol. 107. — P. 79-110
• 63 Jayalakshm S., Singh R.A., Mohan S. etc. Mechanical Properties and Tribological Behavior of Magnesium Metal Matrix Composites With Micron-Sized and Nano-Sized Reinforcements // Encyclopedia of Materials: Metals and Alloys 2021. — P. 26-45

2022

• 1 Konovalov S.V., Makhan Kh., Panchenko I.A. etc. Исследование свойств и структуры алюмоматричных композитов, армированных частицами TiO2 // Ползуновский вестник 2022. — Vol. 2. № 4. — P. 7-13
• 2 Aryshenskii E., Hirsch J., Drits A. etc. Texture Development in Aluminum Alloys with High Magnesium Content // Metals 2022. — Vol. 12. Issue 5.
• 3 Cheng W., Dai F., Huang S. etc. Surface Topography Control of TA2 Pure Titanium in Laser Shock Peening // Metals 2022. — Vol. 12. Issue 6. № 6.
• 4 Sonar T., Balasubramanian V., Venkateswaran T. etc. Potentiodynamic corrosion behavior and microstructural features of gas tungsten constricted arc (GTCA)-welded superalloy 718 joints // Materialpruefung/Materials Testing 2022. — Vol. 63. Issue 12. — P. 1116-1123
• 5 Wang M., Konovalov S., Dai F. etc. Influence of Process Parameters on Laser Shock Processing Effect of Aero-Engine Blades // Journal of Surface Investigation 2022. — Vol. 16. Issue 6. № 6. — P. 1208-1220
• 6 Osincev K. A. , Konovalov S., Gromov V. etc. Microstructure and Phase Composition of the Cr-Mn-Fe-Co-Ni High-Entropy Alloy Obtained by Wire-Arc Additive Manufacturing // Key Engineering Materials. — 2022. — Vol. 910 KEM. — P. 748-753
• 7 Zhukov D., Konovalov S., Chen D. etc. Specifics of diagnostics and investigation of material properties in pipes with planar defects // INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING 2022. — Vol. 199.
• 8 Aryshenskii E., Konovalov S., Bazhenov V. etc. Features of the Microstructural Composition of Low-Alloyed Aluminum Alloys of the 6XXX Series with Small Additions of Zr and Sc // Key Engineering Materials. — 2022. — Vol. 910 KEM. — P. 994-1001
• 9 Osintsev K., Konovalov S., Zaguliaev D. etc. Investigation of Co-Cr-Fe-Mn-Ni Non-Equiatomic High-Entropy Alloy Fabricated by Wire Arc Additive Manufacturing // METALS 2022. — Vol. 12. Issue 2. № 2.
• 10 Su Ch. , Chen S. , Konovalov S. etc. Direct laser deposited CoCrFeNiMn high-entropy alloys: relationship between pores-microstructure- tensile properties // Cailiao Gongcheng/Journal of Materials Engineering 2022. — Vol. 50. Issue 3. — P. 43-49
• 11 Gromov V.E., Shlyarova Y.A., Ivanov Y.F. etc. Effect of Electron Beam Treatment on the Fracture Behavior of High–Entropy Cr – Mn – Fe – Co - Ni Alloy // Metal science and heat treatment 2022. — Vol. 64. Issue 5-6. № 5-6. — P. 276-280
• 12 Osincev K. A. , Konovalov S.V., Gromov V.E. etc. Microstructure and mechanical properties of non-equiatomic Co25.4Cr15Fe37.9Mn3.5Ni16.8Si1.4 high-entropy alloy produced by wire-arc additive manufacturing // MATERIALS LETTERS 2022. — Vol. 312.
• 13 Ivanov Y., Zaguliaev D., Konovalov S. etc. Surface modification of sub-eutectic silumin by a pulsed electron beam // Surfaces and Interfaces 2022. — Vol. 29.
• 14 Kirillova Anna Viktorovna, Konovalov S.V., Gromov V.E. etc. Influence of electron-beam processing on the properties of CO-CR-FE-MN-NI high-entropy alloy // 11th International online symposium "Materials in External Fields" (ISMEF 2022). — 2022. — P. 89-91
• 15 Sonar T., Balasubramanian V., Venkateswaran T. etc. Effect of Delta Straight and Delta Pulsed arc Modes on Weld Bead Geometry, Microstructure and Tensile Properties of InterPulsed GTCA-Welded Inconel 718 Alloy Joints for Aerospace and Nuclear Applications // Transactions of the Indian Institute of Metals 2022. —
• 16 Gen Ya. , Panchenko I., Chen S. etc. Wire arc additive manufacturing Al-5.0 Mg alloy: Microstructures and phase composition // MATERIALS CHARACTERIZATION 2022. — Vol. 187.
• 17 Nevskii S.A., Sarychev V.D., Konovalov S.V. etc. Modeling the mechanism of micro/nanostructured surface formation in Al-Co-Cr-Fe-Ni and Co-Cr-Fe-Mn-Ni high-entropy alloys treated with a high current pulsed electron beam // Letters on Materials 2022. — Vol. 12. Issue 3. № 3. — P. 249-254
• 18 Ivanov Y.F., Gromov V.E., Zagulyaev D.V. etc. Improvement of Functional Properties of Alloys by Electron Beam Treatment // Steel in Translation 2022. — Vol. 52. Issue 1. № 1. — P. 71-75
• 19 Aryshensky E.V., Konovalov S.V., Latushkin I.A. etc. STUDY OF THE EVOLUTION OF CRYSTALLOGRAPHIC TEXTURE DURING THE DRAWING OF A LOW-ALLOYED ALUMINUM ALLOY // Tsvetnye Metally 2022. — Vol. 2022. Issue 5. — P. 60-66
• 20 Gromov V.E., Konovalov S.V., Shlyarova Y.A. etc. Control of Cantor CoCrFeMnNi high-entropy alloy mechanical properties [Управление механическими свойствами высокоэнтропийного сплава Cantor CoCrFeMnNi] // Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya 2022. — Vol. 65. Issue 8. № 8. — P. 563-572
• 21 Osintsev K., Konovalov S., Ivanov Y. etc. Characterization of Al-Co-Cr-Fe-Mn-Ni High-Entropy Alloy Coating Fabricated onto AA5083 Using Wire-Arc Additive Manufacturing // Metals 2022. — Vol. 12. Issue 10. № 10.
• 22 Khuan L. , Chen S. , Konovalov S. etc. Modeling and Optimization of Solidification Cracking of 4043 Aluminum Alloys Produced by Cold Metal Transfer Welding // Research on Cu-6.6%Al-3.2%Si Alloy by Dual Wire Arc Additive Manufacturing 2022. —
• 23 Li Q., Chen X., Chen S. etc. Microstructure evolution of additively manufactured CoCrFeNiAl0.4 high-entropy alloy under thermo-mechanical processing // Journal of Materials Research and Technology 2022. — Vol. 16. — P. 442-450
• 24 Ivanov Yu.F., Abzaev Y.A., Gromov V.E. etc. Phase analysis and structural state of AlCoFeCrNi high-entropy alloy of non-equiatomic composition // AIP Conference Proceedings. — 2022. — Vol. 2509.
• 25 Zhukov D.V., Melnikov A.A., Konovalov S.V. etc. Reasons for formation of transverse cracks in longitudinal weld of a pipe of the main gas pipeline // Chernye Metally 2022. — Vol. 2022. Issue 9. № 9. — P. 34-38
• 26 Nevskii S.A., Sarychev V.D., Melekhov D. etc. Effect of magnetic fields on the formation process of micro- and nanostructures in metals and high-entropy alloys molten // AIP Conference Proceedings. — 2022. — Vol. 2509.
• 27 Gromov V.E., Konovalov S.V., Rubannikova Yu.A. etc. Ways of increasing mechanical properties of cantor high entropy alloy // AIP Conference Proceedings. — 2022. — Vol. 2509.
• 28 Gromov V.E., Konovalov S.V., Ivanov Yu.F. etc. Structure and properties of the CrMnFeCoNi high-entropy alloy irradiated with a pulsed electron beam // Journal of Materials Research and Technology 2022. — Vol. 19. — P. 4258-4269
• 29 Drits A.M., Aryshensky E.V., Kudryavtsev E.A. etc. The study of supersaturated solid solution decomposition in magnesium-rich aluminum alloys with scandium and hafnium additions // Frontier Materials and Technologies 2022. — Issue 4. № 4. — P. 38-48
• 30 Osintsev K.A., Gromov V.E., Konovalov S.V. etc. High Entropy Alloys: Structure, Mechanical Properties, Deformation Mechanisms and Applications // Steel in Translation 2022. — Vol. 52. Issue 2. № 2. — P. 167-173
• 31 Ivanov Y.F., Gromov V.E., Osincev K. A. etc. Deformation and Fracture of High Entropy AlCoCrFeNi Alloy // Russian Physics Journal 2022. —
• 32 Gen Ya. , Chen S. , Konovalov S. etc. Ultrafast microstructure modification by pulsed electron beam to enhance surface performance // Surface and Coatings Technology 2022. — Vol. 434.
• 33 Bondareva O.S., Dobychina O.S., Melnikov A.A. etc. EDS + EBSD Phase Analysis of the Zinc Coating Formed on Steel in a Melt with Nickel Microadditives // Journal of Surface Investigation 2022. — Vol. 16. Issue 6. № 6. — P. 1069-1073

2000

• 1 Gromov, VE, Tsellermaer, VY, Leboshkin, BM etc. Electrostimulated wire drawing and surface loss of strength // METAL FORMING 2000. — 2000. — P. 585-587