Zubanov, Vasilii M.

2024

• 1 Popov G.M., Zubanov V.M., Goryachkin E.S. etc. Improving the Accuracy of Performance Calculation for Multistage Axial Turbines of Aircraft Engines Using Three-Dimensional Numerical Modeling // Russian Aeronautics 2024. — Vol. 67. Issue 1. № 1. — P. 96-102
• 2 Popov G.M., Zubanov V.M., Baturin O.V. etc. Linked multidisciplinary optimisation of a twin-shaft turbine of a promising turboshaft engine // Journal of Physics: Conference Series. — 2024. — Vol. 2784. Issue 1. № 1.

2023

• 1 Popov G., Zubanov V., Goriachkin E. etc. Optimization of the Working Process of a Two-Stage HPT of a Modern GTE for Civil Aviation // International Journal of Mechanical Engineering and Robotics Research 2023. — Vol. 12. Issue 1. № 1. — P. 48-56
• 2 Popov G., Zubanov V., Goriachkin E. etc. Verification of a Numerical Model of a Two-Stage HPT of a Modern GTE for Civil Aviation // International Journal of Mechanical Engineering and Robotics Research 2023. — Vol. 12. Issue 2. № 2. — P. 78-83
• 3 Zubanov V.M., Popov G.M., Melnikov S.A. etc. Improving the thermal condition of the high-pressure turbine blade // Proceedings of the International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2023. — Vol. 1. — P. 234-242

2022

• 1 Zubanov V.M., Kharitonova A.A. Исследование влияния перепускных клапанов на характеристики осевого компрессора // XXVI Международная научно-практическая конференция «Решетневские чтения». — 2022. — Pt. 1. — P. 178-180
• 2 Popov Grigoriy Mikhaylovich, Mikheev M.G. , Baturin O.V. etc. Aerodynamic Improvement Of The 16-Stage Axial Compressor // GPPS Xi’an21. — 2022. —
• 3 Volkov A., Zubanov V., Matveev V. etc. Rational Settings of a Numerical Model to Simulate the Working Process of an Axial-Film-Cooled Turbine Blade // International Journal of Mechanical Engineering and Robotics Research 2022. — Vol. 11. Issue 12. № 12. — P. 901-907

2021

• 1 Popov G.M., Zubanov V.M., Novikova Y.D. etc. A method for checking the possibility of joint work of the auxiliary power unit and the starter // Journal of Physics: Conference Series. — 2021. — Vol. 1891. Issue 1.
• 2 Prokofiev A.B., Baturin O.V., Popov G.M. etc. Improving the performance of a two-stage centrifugal pump by optimizing its flowpath // AIP Conference Proceedings. — 2021. — Vol. 2351.
• 3 Popov G., Miheev M., Vorobyev A. etc. COMPREHENSIVE PERFORMANCE IMPROVEMENT for A 16-STAGE AXIAL COMPRESSOR // Proceedings of the ASME Turbo Expo. — 2021. — Vol. 2A-2021.
• 4 Kharitonova A.A., Zubanov V.M., Scherban A.I. etc. Численное исследование характеристик соплового аппарата осевой турбины с учетом различной геометрии входной области // 20th International Conference “Aviation and Cosmonautics” (AviaSpace2021). 22-26 November 2021. Moscow. Abstracts.. — 2021. — P. 158-159
• 5 Popov G., Miheev M., Zubanov V. etc. Improvement of the aerodynamic parameters of a 16-stage axial compressor for industrial gas turbine power unit // AIAA Propulsion and Energy Forum, 2021. — 2021. —
• 6 Popov G.M., Baturin O.V., Goriachkin E.S. etc. Multidisciplinary optimization of a helicopter GTE Turbine // AIAA Propulsion and Energy Forum, 2021. — 2021. —
• 7 Nepomnyaschiy V.O., Popov G.M., Miheev M.G. etc. Analysis of 16-Stage Compressor Working Process for an Industrial Gas Turbine Uint // 2021 International Scientific and Technical Engine Conference (EC). — 2021. — P. 1-5

2020

• 1 Popov G., Baturin O., Zubanov V. etc. Optimization of a single-stage air starter turbine // SIMULTECH 2020 - Proceedings of the 10th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2020. — P. 155-162
• 2 Popov G., Baturin O., Goriachkin E. etc. Axial compressor optimization method // IOP Conference Series: Materials Science and Engineering. — 2020. — Vol. 904. Issue 1.
• 3 Popov Grigoriy Mikhaylovich, Zubanov V.M., Matveev V.N. etc. Метод согласования совместной работы воздушного стартера и вспомогательной силовой установки // Вестник ПНИПУ. Аэрокосмическая техника 2020. — № 63. — P. 5-13
• 4 Zubanov V.M., Popov G.M., Volkov A. A. etc. Optimization of an air turbostarter of a launch system for gas turbine engine // AIAA Propulsion and Energy 2020 Forum. — 2020. — P. 1-9
• 5 Popov G., Zubanov V., Baturin O. etc. Optimization of an air turbo starter considering its joint work with an auxiliary power unit // Proceedings of the ASME Turbo Expo. — 2020. — Vol. 2C-2020.
• 6 Zubanov V., Popov G., Egorov I. etc. Method for determining the applicability of an air turbine for operation in a gas turbine engine launch system // SIMULTECH 2020 - Proceedings of the 10th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2020. — P. 147-154
• 7 Popov G., Matveev V., Zubanov V. etc. Improving the start-up parameters of a gas turbine engine by adaptation the air turbine starter // IOP Conference Series: Materials Science and Engineering. — 2020. — Vol. 904. Issue 1.
• 8 Popov G.M., Baturin O.V., Zubanov V.M. etc. The method of matching the joint work of the auxiliary power unit and turbostarter and determining the start time of the gas turbine engine // AIAA Propulsion and Energy 2020 Forum. — 2020. — P. 1-10

2019

• 1 Popov G.M., Baturin O.V., Novikova Y.D. etc. Estimation of the influence of the inlet nonuniformity on the performance of a fan of a turbofan engine // ASME 2019 Gas Turbine India Conference, GTINDIA 2019. — 2019. — Vol. 1.
• 2 Matveev V., Volkov A. A. , Zubanov V. etc. The Best Settings of Numerical Models of Axial Gas Turbines for Obtaining Reliable Results and Optimization // Proceedings - 2019 21st International Conference "Complex Systems: Control and Modeling Problems", CSCMP 2019. — 2019. — Vol. 2019-September. — P. 529-534
• 3 Baturin O., Kolmakova D. A. , Popov G. etc. Reducing the hydraulic resistance in the inlet device of the gas turbine unit // SIMULTECH 2019 - Proceedings of the 9th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2019. — P. 88-99
• 4 Popov G., Baturin O., Volkov A. A. etc. The influence of the level of the flow path blockage at the inlet on the fan characteristics // SIMULTECH 2019 - Proceedings of the 9th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2019. — P. 247-254
• 5 Marchukov E., Egorov I., Goriachkin E. etc. Numerical Modeling of the Axial Turbine Workflow to Improve Its Efficiency // Proceedings - 2019 21st International Conference "Complex Systems: Control and Modeling Problems", CSCMP 2019. — 2019. — Vol. 2019-September. — P. 509-513
• 6 Marchukov E., Egorov I., Popov G. etc. Increase of efficiency of axial uncooled turbine by optimization of its blades shape using cfd and optimization software // AIAA Propulsion and Energy Forum and Exposition, 2019. — 2019. —
• 7 Baturin O., Kolmakova D. A. , Krivcov A. V. etc. Estimation of the hydraulic losses in the work shaft of a gas turbine engine of a gas compressor unit under various operating conditions // AIAA Propulsion and Energy Forum and Exposition, 2019. — 2019. —
• 8 Popov G.M., Matveev V.N., Zubanov V.M. etc. Selection of parameters for numerical models of the working process of axial uncooled turbines intended perform optimization and verification calculations // AIAA Propulsion and Energy Forum and Exposition, 2019. — 2019. —

2018

• 1 Baturin O., Popov G., Kolmakova D. A. etc. Optimization of Powerful Two-stage Screw Centrifugal Pump // MATEC Web of Conferences. — 2018. — Vol. 220.
• 2 Novikova Y., Zubanov V. Numerical Investigation of the Influence of the Input Air Irregularity on the Performance of Turbofan Jet Engine // IOP Conference Series: Materials Science and Engineering. — 2018. — Vol. 302. Issue 1.
• 3 Ermakov A., Popov G., Kolmakova D. A. etc. Strategy for reduction of the negative effects of circumferential flow irregularity in axial compressor // SIMULTECH 2018 - Proceedings of 8th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2018. — P. 144-150
• 4 Baturin O., Kolmakova D. A. , Popov G. etc. Improving the characteristics of two-stage fuel pump by optimizing the blades geometry // SIMULTECH 2018 - Proceedings of 8th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2018. — P. 357-364
• 5 Matveev V., Zubanov V., Shabliy L. etc. Optimization of nozzle shape of hydrogen-oxygen rocket engine // SIMULTECH 2018 - Proceedings of 8th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2018. — P. 365-370
• 6 Zubanov V.M., Stepanov D.V., Shabliy L.S. Technology for Transient Simulation of Vibration during Combustion Process in Rocket Thruster // IOP Conference Series: Materials Science and Engineering. — 2018. — Vol. 302. Issue 1.
• 7 Zubanov V., Volkov A. A. , Matveev V. etc. Optimization of fuel two-stage screw centrifugal pump of rocket powerful turbopump unit // Proceedings of the ASME Turbo Expo. — 2018. — Vol. 2B-2018.
• 8 Popov G., Matveev V., Baturin O. etc. Estimation of the effect of 3d grid parameters on the simulation of the working process of axial turbines // SIMULTECH 2018 - Proceedings of 8th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2018. — P. 371-377

2017

• 1 Sulinov A.V., Shabliy L.S., Zubanov V.M. Simulation Methodology of the Screw-Centrifugal Pump for Liquid Hydrogen // Journal of Physics: Conference Series. — 2017. — Vol. 803. Issue 1.
• 2 Novikova Y., Popov G., Goriachkin E. etc. The process of gas-dynamic design of pneumatic braking system using the baseline compressor // IOP Conference Series: Materials Science and Engineering. — 2017. — Vol. 232. Issue 1.
• 3 Zubanov V.M., Shabliy L.S., Stepanov D. V. Parametric Optimization of Chamber Nozzle Shape for Hydrogen-Oxygen Rocket Engine via Multiple CFD-Simulations with Combustion Process // 5th International Academic Conference for Graduates, Nanjing University of Aeronautics and Astronautics (IACGN 2017). — 2017. — P. 6-10
• 4 Zubanov V.M., Stepanov D.V., Shabliy L.S. The technique for Simulation of Transient Combustion Processes in the Rocket Engine Operating with Gaseous Fuel "hydrogen and Oxygen" // Journal of Physics: Conference Series. — 2017. — Vol. 803. Issue 1.

2016

• 1 Vasilii Zubanov, Leonid Shabliy, Krivcov A.V. CFD-modeling Features of the Pump with Hydro-Turbine // The 4th International Academic Conference for Graduates, NUAA. — 2016. — Vol. 2. — P. 34-39
• 2 Zubanov V.M., Shabliy L.S., Krivcov A. V. etc. Technique for adequate CFD-modeling of the pump with hydro-drive of the low-pressure stage // Proceedings of the ASME Turbo Expo. — 2016. — Vol. 2C-2016.
• 3 Zubanov V.M., Shabliy L.S., Stepanov D.V. Методика нестационарного моделирования процессов горения в ракетном двигателе малой тяги на газообразном топливе кислород и водород // Vestnik of Samara University. Aerospace and Mechanical Engineering 2016. — Vol. 15. № 4. — P. 64-74
• 4 Matveev V.N., Shabliy L.S., Krivcov A.V. etc. Методика моделирования рабочего процесса двухступенчатого насоса с гидроприводом первой ступени // Vestnik of Samara University. Aerospace and Mechanical Engineering 2016. — Vol. 15. № 4. — P. 102-113

2015

• 1 Zubanov V.M., Shabliy L.S., Krivcov A.V. etc. Методика достоверного CFD-моделирования двухкаскадного шнекоцентробежного насоса // VESTNIK of the SAMARA STATE AEROSPACE UNIVERSITY 2015. — № Т. 14, № 3, ч.2. — P. 316-326
• 2 Zubanov V., Egorychev V. S. , Shabliy L. Design of Rocket Engine for Spacecraft Using CFD-Modeling // Procedia Engineering. — 2015. — Vol. 104. — P. 29-35
• 3 Sulinov A.V., Shabliy L.S., Zubanov V.M. Методы моделирования рабочего процесса водородных шнекоцентробежных насосов с использованием ANSYS CFD // VESTNIK of the SAMARA STATE AEROSPACE UNIVERSITY 2015. — № Т. 14, № 3, ч.2. — P. 305-315
• 4 Zubanov V.M., Shabliy L.S., Krivcov A. V. Rational technique for multistage centrifugal pump CFD-modeling // Proceedings of the ASME Turbo Expo. — 2015. — Vol. 2B.

2014

• 1 Zubanov V., Shabliy L., Krivcov A. V. Centrifugal kerosene pump CFD-modeling // Research Journal of Applied Sciences 2014. — Vol. 9. Issue 10. — P. 629-634
• 2 Zubanov V.M., Shabliy L.S., Krivcov A. V. CFD-modeling of powerful screw centrifugal kerosene pump // ASME 2014 Gas Turbine India Conference, GTINDIA 2014. — 2014. —
• 3 Zubanov V., Egorychev V. S. , Shabliy L. Hydrogen-Oxygen rocket engine design using CFD-modeling // Research Journal of Applied Sciences 2014. — Vol. 9. Issue 10. — P. 660-663