Grechnikov, Fedor V.

2022

• 1 Grechnikov F.V., Erisov Y.A., Surudin S.V. etc. Influence of the Cold Rolling Reduction Ratio and the Final Annealing Temperature on the Properties and Microstructure of Al–Mg–Sc Alloy Sheets // Russian journal of non-ferrous metals 2022. — Vol. 63. Issue 5. № 5. — P. 544-550
• 2 Aryshenskii V., Grechnikov F., Aryshenskii E. etc. Alloying Elements Effect on the Recrystallization Process in Magnesium-Rich Aluminum Alloy // Materials 2022. — Vol. 15. Issue 20. № 20.
• 3 Grechnikov F.V., Klentak A. Methods for Assessing Heat Energy Losses through the Building Envelope, as Well as Methods for Calculating the Resistance to Heat Transfer of the Building Envelope // AIP Conference Proceedings. — 2022. — Vol. 2503.
• 4 Bobrovskij I., Khaimovich A., Bobrovskij N. etc. Derivation of the Coefficients in the Coulomb Constant Shear Friction Law from Experimental Data on the Extrusion of a Material into V-Shaped Channels with Different Convergence Angles: New Method and Algorithm // Metals 2022. — Vol. 12. Issue 2.
• 5 Ragazin A.A., Yashin V.V., Latushkin I. A. etc. Homogenization Modes Effect on Mechanical Properties and Corrosive Characteristics of the Rolled Products from Al-Mg (1570) Aluminum Alloy with Addition of Scandium and Zirconium // Materials Science Forum. — 2022. — Vol. 1049 MSF. — P. 102-107

2021

• 1 Erisov Y., Surudin S., Grechnikov F. etc. An exact axisymmetric solution in anisotropic plasticity // Symmetry 2021. — Vol. 13. Issue 5.
• 2 Yashin V.V., Aryshenskii E.V., Drits A.M. etc. Effect of Scandium on the Microstructure of the Al–Cu–Mn–Mg–Hf–Nb Alloy // Physics of Metals and Metallography 2021. — Vol. 122. Issue 10. — P. 960-968
• 3 Grechnikov F.V., Erisov Y.A., Surudin S.V. etc. Development of a Rheological Model of Hot Deformation as Exemplified by 1424 and В-1461 Aluminum Lithium Alloys // Russian journal of non-ferrous metals 2021. — Vol. 62. Issue 1. — P. 48-53
• 4 Mikheev V.A., Grechnikov F.V., De Alvarenga Roberto etc. Metric transformation of the surface of a tight punch for forming sheet shells of double curvature // III International Scientific Conference MIP: Engineering-III 2021: Modernization, Innovations, Progress: Advanced Technologies in Material Science, Mechanical and Automation Engineering. — 2021. — Vol. 1155.

2020

• 1 Bobrovskii I.N., Zibrov P.F., Bobrovskii N.M. etc. Comparison of the Surface Texture of a Crankshaft after Grinding and after Burnishing // Russian Engineering Research 2020. — Vol. 40. Issue 11. — P. 939-941
• 2 Erisov Y., Grechnikov F., Surudin S. etc. A Simplified Yield Criterion of the Orthotropic Material Considering the Crystallographic Texture // IOP Conference Series: Materials Science and Engineering. — 2020. — Vol. 986. Issue 1.

2019

• 1 Grechnikov F.V., Kochetkov A.V., Zakharov O.V. Method for compensation of radius and shape of spherical probe when measuring complex surfaces with CMMs // Lecture Notes in Mechanical Engineering 2019. — Issue 9783319956299. — P. 1771-1780
• 2 Grechnikov F.V., Erisov Y.A., Alexandrov S.E. Effect of the Anisotropic Yield Condition on the Predicted Distribution of Residual Stresses in a Thin Disk // Doklady Physics 2019. — Vol. 64. Issue 5. — P. 233-237
• 3 Glushenkov V.A., Belyaeva I. A. , Grechnikov F.V. etc. Methods of Compaction of the Al–B–W Powder Composition in a Metal Shell // Russian journal of non-ferrous metals 2019. — Vol. 60. Issue 3. — P. 232-238
• 4 Grechnikov F.V., Erisov Y.A., Petrov I.N. Influence of the Crystallographic Texture of Aluminum Sheets on the Fracture Toughness of Metal–Polymer Composite Materials // Russian Metallurgy (Metally) 2019. — Vol. 2019. Issue 4. — P. 341-345
• 5 Alekhina V.K., Bikbaev R.M., Glushchenkov V.A. etc. Applications of Shape Memory // Russian Engineering Research 2019. — Vol. 39. Issue 12. — P. 1043-1045
• 6 Erisov Y., Grechnikov F., Kuzin A. etc. Texture evolution during hot deformation of al-cu-li-mg-zn-zr-sc alloy // Materials Science Forum. — 2019. — Vol. 946 MSF. — P. 856-861

2018

• 1 Erisov Y., Surudin S., Grechnikov F. Hot deformation behavior of Al-Cu-Li-Mg-Zn-Zr-Sc alloy in as-cast and hot-rolled condition // Materials Science Forum. — 2018. — Vol. 920 MSF. — P. 244-249
• 2 Koroteev P.S., Dobrokhotova Z.V., Grechnikov F.V. etc. Heterometallic Carboxylate Complexes as Precursors for Mixed Oxides: II. d–d Carboxylates // Russian Journal of General Chemistry 2018. — Vol. 88. Issue 6. — P. 1290-1305
• 3 Grechnikov F.V., Kochetkov A.V., Zakharov O.V. Measurement of sphericity using different basic spheres // Materials Science Forum. — 2018. — Vol. 945 MSF. — P. 906-910
• 4 Grechnikov F.V., Yakoshin A.S., Zakharov O.V. Method for Selecting Control Points on Spheres When Measuring on Coordinate Measuring Machines // 2018 2nd School on Dynamics of Complex Networks and their Application in Intellectual Robotics, DCNAIR 2018. — 2018. — P. 109-111
• 5 Grechnikov F.V., Erisov Y.A. Scientific Foundations for Creation of Sheet Materials with Specified Crystallography of Structure for Aerospace Applications // Metal science and heat treatment 2018. — Vol. 60. Issue 1-2. — P. 13-17
• 6 Grechnikov F.V., Rezchikov A.F., Zakharov O.V. Iterative Method of Adjusting the Radius of the Spherical Probe of Mobile Coordinate-Measuring Machines When Monitoring a Rotation Surface // Measurement Techniques 2018. — Vol. 61. Issue 4. — P. 347-352
• 7 Grechnikov F.V., Kochetkov A.V., Zakharov O.V. The minimax principle for estimating the shape error in the measurement of complex surfaces // 2018 International Russian Automation Conference, RusAutoCon 2018. — 2018. —
• 8 Grechnikov F.V., Surudin S.V., Erisov Y.A. etc. Influence of Material Structure Crystallography on its Formability in Sheet Metal Forming Processes // IOP Conference Series: Materials Science and Engineering. — 2018. — Vol. 286. Issue 1.
• 9 Lukonina N., Nosova E., Grechnikov F. The effect of annealing on mechanical properties, the number of fluidity, and the size of coherent scattering regions in amg1, amg5, and amg6 alloys // Solid State Phenomena. — 2018. — Vol. 284 SSP. — P. 470-475
• 10 Grechnikov F.V., Popov I.P., Kochetkov A.V. etc. Iterative Algorithm for Radius Stylus Compensation of Touch Sensor When Measured on CMMs of Complex Surfaces // 2018 14th International Scientific-Technical Conference on Actual Problems of Electronic Instrument Engineering, APEIE 2018 - Proceedings. — 2018. — P. 237-241
• 11 Erisov Y.A., Grechnikov F.V. Physical Modelling of Hot Rolling for Low-Density Alloy of the Al–Mg–Li–Zr–Zn–Sc System // Metallurgist 2018. — Vol. 61. Issue 9-10. — P. 822-829
• 12 Nosova E., Grechnikov F., Lukonina N. Research of structural entropy of sheet aluminium alloys depending on annealing temperature // MATEC Web of Conferences. — 2018. — Vol. 224.
• 13 Grechnikov F.V., Kochetkov A.V., Zakharov O.V. Mathematical model for touching of spherical probe and complex measured surface at CMMs // 2018 International Russian Automation Conference, RusAutoCon 2018. — 2018. —
• 14 Grechnikov F.V., Erisov Y.A., Surudin S.V. etc. Theoretical and experimental study of plastic anisotropy of Al-1Mn alloy taking into account the crystallographic orientation of the structure // Materials Physics and Mechanics 2018. — Vol. 40. Issue 2. — P. 274-284
• 15 Grechnikov F.V., Kochetkov A.V., Zakharov O.V. Selection of Methods for Filtering the Signal when Measuring at Coordinate Measuring Machine // 2018 14th International Scientific-Technical Conference on Actual Problems of Electronic Instrument Engineering, APEIE 2018 - Proceedings. — 2018. — P. 231-236
• 16 Grechnikov F.V., Erisov Y.A., Surudin S.V. etc. Investigation into the Formation of Texture, Microstructure, and Anisotropy of Properties during Rolling Sheets of the Aluminum–Lithium 1420 Alloy // Russian journal of non-ferrous metals 2018. — Vol. 59. Issue 1. — P. 56-61
• 17 Grechnikov F.V., Kochetkov A.V., Zakharov O.V. Analysis of the applicability of filtration methods for coordinate measurements // MATEC Web of Conferences. — 2018. — Vol. 224.

2017

• 1 Grechnikov F.V., Khaimovich A.I., Mikhelkevich V. etc. The research of friction influences on the formation process by lateral extrusion into radial wedge-type branches // Key Engineering Materials. — 2017. — Vol. 746 KEM. — P. 56-62
• 2 Grechnikov F.V. , Erisov Ya.A. , Tikhonova A.A. etc. Влияние анизотропии заготовок на разнотолщинность стенки изделия при вытяжке // Известия Самарского научного центра РАН 2017. — Vol. 19. № 1(3). — P. 581-586
• 3 Medvedev A.G., Zhubrikov A.V., Melnik E.A. etc. Development of combined granulation and encapsulation process in production of sodium percarbonate // Theoretical Foundations of Chemical Engineering 2017. — Vol. 51. Issue 4. — P. 515-522
• 4 Grechnikov F.V., Bobrovskiy I.N., Erisov Ya.A. etc. Инициатива «геном материала» в мире и Российской Федерации // Известия Самарского научного центра РАН 2017. — Vol. 19. № 1 (3). — P. 563-573
• 5 Alekhina V.K., Glushchenkov V.A., Grechnikov F.V. etc. Device for measuring of hardness with an actuator from a material with shape memory // 19 th International Conference on Joining Materials . — 2017. — P. 483-488
• 6 Huang T.-H., Jiang C.-P., Grechnikov F.V. Effect of grain size on mechanical revolution of pure titanium and die cavity filling rate in hot squeezing mini spur-gear forming process // International Journal of Precision Engineering and Manufacturing 2017. — Vol. 18. Issue 10. — P. 1371-1377
• 7 Dmitriev A.M., Grechnikov F.V., Korobova N.V. Extending the life of stepped punches in the cold extrusion of bushes // Russian Engineering Research 2017. — Vol. 37. Issue 5. — P. 411-419
• 8 Grechnikov F.V., Nosova E.A. Effect of Composition and Distribution of Phases after Aging on Stamp Ability for Aluminum Alloy D16 (AA2014) Sheets // Russian journal of non-ferrous metals 2017. — Vol. 58. Issue 6. — P. 625-631
• 9 Huang T.-H., Jiang C.-P., Grechnikov F. etc. Effect of annealing treatment on die filling rate of mini gear in squeezing forming process // Key Engineering Materials. — 2017. — Vol. 746 KEM. — P. 108-113
• 10 Nesterenko E.S., Grechnikov F.V. Calculation of parameters of drawing-out the half-sphere parts in the stamp with an elastic element // Russian journal of non-ferrous metals 2017. — Vol. 58. Issue 5. — P. 495-499
• 11 Grechnikov F.V., Kochetkov A.V., Zakharov O.V. Strategy of surfaces measuring on the basis of minimization of control points number // Proceedings - 2017 2nd International Ural Conference on Measurements, UralCon 2017. — 2017. — Vol. 2017-November. — P. 64-67
• 12 Nosova E., Erisov Y., Grechnikov F. Multi-cycle rolled aluminum alloy 3103 sandwiches: Mechanical properties and stamp ability // MATEC Web of Conferences. — 2017. — Vol. 129.

2016

• 1 Alexandrov S., Erisov Y., Grechnikov F. Effect of the yield criterion of matrix on the brittle fracture of fibres in uniaxial tension of composites // Advances in Materials Science and Engineering 2016. — Vol. 2016.
• 2 Erisov Y., Grechnikov F. The research of influence of cold rolling conditions on mechanical properties anisotropy of sheets from aluminum alloy 8011A // Key Engineering Materials. — 2016. — Vol. 685. — P. 385-388
• 3 Alexandrov S.E., Kien N.D., Manh D.V. etc. Plane strain bending of a bimetallic sheet at large strains // Structural Engineering and Mechanics 2016. — Vol. 58. Issue 4. — P. 641-659
• 4 Erisov Y.A., Grechnikov F.V., Surudin S.V. Yield function of the orthotropic material considering the crystallographic texture // Structural Engineering and Mechanics 2016. — Vol. 58. Issue 4. — P. 677-687
• 5 Grechnikov F.V., Klentak L. S. Influence of the portfolio approach on the effective use of time by students of higher education institutions // Integration of Education 2016. — Vol. 20. Issue 1. — P. 88-96
• 6 Grechnikov F.V., Afanasyev A.E., Kargin V.R. etc. Pressing tubes with conical-stepped needles computer simulatinG // Key Engineering Materials. — 2016. — Vol. 684. — P. 204-210
• 7 Afanas’ev A.E., Grechnikov F.V., Kargin V.R. etc. Optimizing the Geometry of Piercing Stub Mandrels for Tube Extrusion // Metallurgist 2016. — Vol. 60. Issue 7-8. — P. 767-770
• 8 Erisov Y., Surudin S., Shlyapugin A. etc. The end-to-end computer simulation of casting and subsequent metal forming // Key Engineering Materials. — 2016. — Vol. 685. — P. 167-171
• 9 Grechnikov F., Khaimovich A. The study of plastic deformation at high strain rates in upset forging of cylinders // Key Engineering Materials. — 2016. — Vol. 684. — P. 74-79
• 10 Grechnikov F., Gorshkov Y., Erisov Y. Bending process simulation of a flat workpiece with various cross-sectional mechanical properties with PAM-STAMP 2G // Key Engineering Materials. — 2016. — Vol. 685. — P. 133-136
• 11 Grechnikov F.V., Erisov Y.A. Virtual material model with the given crystallographic orientation of the structure // Key Engineering Materials. — 2016. — Vol. 684. — P. 134-142
• 12 Grechnikov F.V., Kargin B.V. Production Methods for Increasing Pipe Drawing Tool Life // Metallurgist 2016. — Vol. 60. Issue 5-6. — P. 519-523
• 13 Grechnikov F.V., Khaimovich A.I. Raising the fatigue resistance of titanium alloys by high-speed deformation in the range of polymorphic transformations // Metal science and heat treatment 2016. — Vol. 57. Issue 11-12. — P. 726-730
• 14 Alexandrov S., Dinh Kien N., Erisov Y. etc. Evolution of internal variables in an expanding hollow cylinder at large plastic strains // SpringerPlus 2016. — Vol. 5. Issue 1.
• 15 Erisov Y.A., Grechnikov F.V., Oglodkov M.S. The influence of fabrication modes of sheets of V-1461 alloy on the structure crystallography and anisotropy of properties // Russian journal of non-ferrous metals 2016. — Vol. 57. Issue 1. — P. 19-24
• 16 Erisov Y., Grechnikov F. Influence of crystallographic texture on plastic instability in sheet metal forming // Proceedings of 2015 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2015. — 2016. —
• 17 Erisov, Y. A., Surudin, S. V., Tiabashvili, A. T. etc. Computer simulation of crystallographic orientations influence on earing during drawing // OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE 2016. — Issue 3. — P. 6-14
• 18 Grechnikov F., Khaimovich A., Alexandrov S. Estimation of hot stamping lubricant efficiency under dynamic loading conditions // Journal of Materials Processing Technology 2016. — Vol. 234. — P. 300-308
• 19 Nosova E.A., Grechnikov F.V. Effect of strain on the anisotropy coefficient of sheet alloys AA2024, Ti-2Al-1Mn, Titanium Grade 2, Steel X10CrNiTi18-9 // Key Engineering Materials. — 2016. — Vol. 684. — P. 366-370
• 20 Erisov Ya.A., Grechnikov F.V., Surudin S.V. Критерий пластичности анизотропной среды с учетом кристаллографии структуры и его экспериментальная проверка // Vestnik of Nosov Magnitogorsk State Technical University 2016. — Vol. 14. № 4. — P. 42-49
• 21 Grechnikov F.V., Erisov Ya.A. Calculation basis of the specified structure crystallography of materials with FCC lattice and its implementation at aluminum strips rolling // XX Mendeleev Congress on general and applied chemistry. — 2016. — P. 32-32
• 22 Grechnikov F.V., Klentak L.S. Разноуровневый характер разделов обобщённого портфолио как потенциал оценочных средств // Kazan Science 2016. — № 2. — P. 111-113
• 23 Grechnikov F.V., Kobenko A.V. Модель комплектования заказа на автомобильном рынке и организация процессов синхронизации сборочных операций на конвейере // Vector of Science of Togliatti State University. Series: Economics and Management 2016. — № 3 (26). — P. 18-23
• 24 Grechnikov F.V., Erisov Ya.A., Alexandrov S.E. Effect of anisotropic yield criterion on the springback in plane strain pure bending // CEUR Workshop Proceedings. — 2016. — Vol. 1638. — P. 569-577
• 25 Zakharov O.V., Grechnikov F.V., Bobrovskij N.M. etc. Without Differential method for determining the points of tangency with rotation surfaces when measured on CMMs // 2016 13th International Scientific-Technical Conference on Actual Problems of Electronic Instrument Engineering, APEIE 2016 - Proceedings. — 2016. — Vol. 1. — P. 245-248

2015

• 1 Aleksandrov S.E., Kien N.D., Grechnikov F.V. Effect of white layer on the distribution of stresses and strains in thin annular discs subject to internal pressure // The 2015 World Congress on Advances in Structural Engineering and Mechanics (ASEM15) & Advances in Aeronautics, Nano, Bio, Robotics, and Energy (ANBRE15). — 2015. — P. 56-56
• 2 Grechnikov F.V., Erisov Y.A. The Theoretical Principles of Sheet Metal Forming Processes Intensification Based on Anisotropy // Applied Mechanics and Materials 2015. — № V. 770. — P. 258-263
• 3 Dmitriev A.M., Korobova N.V., Grechnikov F.V. Intensification of compaction and hardening of iron powder parts and powder steels at the stage of cold molding before sintering // Applied Mechanics and Materials 2015. — № V. 799-800. — P. 307-311
• 4 Grechnikov F.V., Antipov V.V., Erisov Y.A. etc. A manufacturability improvement of glass-fiber reinforced aluminum laminate by forming an effective crystallographic texture in V95 alloy sheets // Russian journal of non-ferrous metals 2015. — Vol. 56. Issue 1. — P. 39-43
• 5 Erisov Y.A., Grechnikov F.V., Pribytkov D.A. Investigation into the influence of cold rolling and thermal treatment modes on the mechanical properties and structure of sheets of BrKh1Tsr chromium-zirconium bronze // Russian journal of non-ferrous metals 2015. — Vol. 56. Issue 2. — P. 190-195
• 6 Grechnikov F.V., Dem’yanenko E.G., Popov I.P. Development of the manufacturing process of aluminum alloys with high strength and conductance // Russian journal of non-ferrous metals 2015. — Vol. 56. Issue 1. — P. 15-19
• 7 Grechnikov F.V., Khaimovich A.I. Development of the requirements template for the information support system in the context of developing new materials involving Big Data // CEUR Workshop Proceedings. — 2015. — Vol. 1490. — P. 364-375

2012

• 1 Glushchenkov V.A., Grechnikov F.V., Chernikov D.G. etc. Formation of electrocontact plugs of anodes of metallurgical production // Russian journal of non-ferrous metals 2012. — Vol. 53. Issue 1. — P. 20-25

2011

• 1 TLUSTENKO S.F., Grechnikov F.V. Теория представления математических моделей и последовательнстей выполнения технологических операторов сборки самолетов // Известия Самарского научного центра РАН 2011. — Vol. 13. № 4. — P. 195-201
• 2 TLUSTENKO S.F., Grechnikov F.V. Обеспечениае точности и ваимозаменяемости в технологических автоматизированных системах производства летательных аппаратов // Известия Самарского научного центра РАН 2011. — Vol. 13. № 4. — P. 202-209

2009

• 1 Glushchenkov V., Grechnikov, F. Hybrid and combined sheet-stamping technologies combining static and dynamic loads // DYMAT 2009: 9TH INTERNATIONAL CONFERENCE ON THE MECHANICAL AND PHYSICAL BEHAVIOUR OF MATERIALS UNDER DYNAMIC LOADING, VOL 1. — 2009. — P. 875-880
• 2 Grechnikov F.V., Noskova E.A., Savel'eva O.G. A study of the anisotropy of properties of sheet semiproducts from alloy AMg10 // Metal science and heat treatment 2009. — Vol. 51. Issue 7-8. — P. 326-329

2007

• 1 Grechnikov, Fyodor V., Aslanov Vladinr S., Suchkova Svetlana A. Integration into the global educational process through the curriculum renovation in SSAU // PROCEEDINGS OF THE 6TH WSEAS INTERNATIONAL CONFERENCE ON EDUCATION AND EDUCATIONAL TECHNOLOGY (EDU'07). — 2007. — P. 264-+

1999

• 1 Grechnikov F.V., Zajtsev V.M. The outlooks of intensification of sheet-stamping processes by using natural anisotropy of crystals // Kuznechno-Shtampovochnoe Proizvodstvo 1999. — Issue 6. — P. 14-18
• 2 Batraev G.A., Kozii S.I., Grechnikov F.B. etc. Particular features in manufacturing heat exchanger tubes with profiled ends // Khimicheskoe I Neftegazovoe Mashinostroenie 1999. — Issue 5. — P. 41-43
• 3 Grechnikov F.V., Uvarov V.V., Kazakov V.N. Properties of secondary titanium-alloy powder // Russian Metallurgy (Metally) 1999. — Issue 5. — P. 82-85
• 4 Grechnikov F.V., Kozij S.I., Popov I.P. Foundation and development of the metal forming department of the academician S.P. Korolev Samara State Airspace University // Litejnoe Proizvodstvo 1999. — Issue 6. — P. 3-9
• 5 Aryshenskij Yu.M., Grechnikov F.B., Aryshenskij V.Yu. etc. Calculation of the preform-formchanging limit in axisymmetric drawing of anisotropic materials // Kuznechno-Shtampovochnoe Proizvodstvo 1999. — Issue 6. — P. 11-13
• 6 Batraev, GA, Kozii, SI, Grechnikov, FV etc. Special features of the fabrication of heat-exchanger tubes with profiled ends // Chemical and Petroleum Engineering 1999. — Vol. 35. Issue 5-6. — P. 283-286

1998

• 1 Glouschenkov V, Grechnikov, F, Shitarev I High technologies and continuing engineering education // KNOWLEDGE REVOLUTION, THE IMPACT OF TECHNOLOGY ON LEARNING, PROCEEDINGS. — 1998. — P. 403-405
• 2 Batraev, GA, Kozii, SI, Grechnikov, FV etc. New mechanism of securing tubes in tube plates // Chemical and Petroleum Engineering 1998. — Vol. 34. Issue 9-10. — P. 632-635
• 3 Batraev G.A., Kozij S.I., Grechnikov F.V. etc. New mechanism of fixing pipes in pipe grids // Khimicheskoe I Neftegazovoe Mashinostroenie 1998. — Issue 9-10. — P. 64-66

1997

• 1 Kolerov O.K., Grechnikov F.V., Logvinov A.N. X-ray method for evaluating the textural perfection of metal alloys // Industrial laboratory 1997. — Vol. 63. Issue 1. — P. 19-21
• 2 Glouschenkov V.A., Grechnikov F.V., Malyshev B.S. Pulse-magnetic processing technology when making parts and units of aerospace engineering // Journal De Physique. IV : JP 1997. — Vol. 7. Issue 3.